Specifications

detects lines cables with or without voltage / to check circuits and lines / location of short circuits and ground

The PCE-CL 10 cable detector can locate cables, lines, short -/ circuits as well as ground, detect voltage lines up to 400 V in circuits or free-voltage lines and test protective tubing/coaxial cables without disconnecting the power. This cable detection system has a signal generator for active lines and a transmitter/receiver for cables without current. The signal generator creates high frequency electro-magnetic signals while the lines are being tested. Those signals are transformed by the receiver at the end of the cable into acoustic or optical signals. There are no interferences between different transmitters, when you use PCE-CL 10 to detect simultaneously diverse transmitters.

 

- Lines can be detected in floors, ceilings and
   walls.

 

- Detection of interruptions in cables, switches
   and fuse

 

 - Detection of short circuits

 

- Detection of ground connection in triple phase
  mains power

 

 - Follow protective tubing in water and heating

 

 - Lines distribution

 

Functions of the components
Technical specifications
General observations
Operating temperature/humidity	0 ... 40 ºC/max. 80% H.r.
Storing temperature/humidity	-20 ... + 60 ºC/max. 80% H.r.
Receiver
Auto shut-off	approx. 5 min.
Absorbed power	max. 40 mA
Display	LCD with bar graph
Battery	9 V battery
Dimensions	192 x 61 x 37 mm
Weight	approx. 180 g
Signal generator
Maximum voltage	400 V AC (0-60 Hz 400 V DC)
Transmitting frequency	125 kHz
Display	LCD
Auto shut-off	approx. 1 hour
Absorbed power	max. 18 mA
Battery	9 V battery
Fuses	Flink, 0.5 A/500 V, 6.3 x 32 mm
Overvoltage category	CAT III/300 V
Dimensions	130 x 69 x 32 mm
Weight	130 g