adhesive seam tape crack sealant tape/paste road construction          

Our main products:road pouring glue, polymer crack stick, crack tape, SBS waterproof membrane, wet-laid waterproofing membrane, transparent waterproof coating, non-cured rubberized asphalt waterproofing coating, cement-based JS composite waterproof material, cccw, semi-conductive adhesive tape, waterproof insulating composite adhesive tape, silicone rubber self adhesive tape, butyl rubber sealing clay, self adhesive rubber band.

Enterprise mission:Be Chaoda people, Walk Chaoda road, Chaoda waterproof covers all the bases.

Operation principle: Gratitude, integrity, responsibility, innovation.

Category:Four different types: High temperature,ordinary type,low temperature and cold type, they are used in the area for 0 ,-10 ,-20  and -30.

Classified by material: Tire base fabric type and non tire base fabric type.

Notes: The failure mode of low temperature tensile test is middle fracture, and shedding-free. It proves good adhesive, the maximal displacement is significantly higher than other similar material.

Features and Advantages:

    Customization, Variety: According to the climate characteristics of the construction site and the width,depth of road crack, you can choose different specification and repair one by one.

Special design for tectorial membrane like skirt:

1. Reduce the odor distributing

2. Prevent adhesive between the belt, better stock and transportation.

3. It is convenient to tear off the membrane.

Soft material, convenient construction:

  1. Function for low temperature of binder improves substantially, material is more soft and good for cornering pasting, do not need the rubber hammer to compact, thus construction efficiency is improved substantially;

  2. Don’t need any tools, pure manual operation can paste 200-300 linear meter/(per*machine-team)

  3. In the case of open traffic, rolling and compaction in a shorter period of time, the phenomenon of jump car can be eliminated in 15 days in the common temperature.

Strong joint, strong bonding:

   1. Binder which the middle is thick and both sides is thin gradually is more easier to joint ground.

   2. Double membrane attached, tear off the membrane when construction, the flat side of the taped seam should be bonded to the crack.

   3. More than 15can be one-time closely bonded with the road.

reliable technical: watertight, not flow and glue wheel at high temperature, not embrittlement at low temperature, good durability, won’t  destroy the road structure.

Strong applicability: be used for crack treatment of concrete pavement,asphalt pavement and old road.
Saving energy and protecting environment: no fuel consumption, no exhaust gas emission.

Construction technology:

1.Simple sweep for crack

2. Tear off the membrane: simple operation, children can master.

3. Tramp by person, when it is bonded, it’s ok.

4. Open the traffic immediately after the bonding.

Construction drawing: 

Product show: 

Factory show:

Laboratory show: 

Exhibition show: 

Certification show: 

Selling Points/Reasons for choosing us:

(1) Our warranty period is one year against the date of shipment.

(2) Free samples of semi-conductive adhesive tape are available for your closer checking.

(3) Well trained and experience sales manager to help you with any of your requirement.

(4) Professional R&D team, strong technical support.

(5) We have all specifications of our products and can meet customers’ product diversity needs.

(6) We prefer to accept your lower MOQ in order to relieve your purchasing stress.

(7)Markets are widely distributed to home and abroad and enjoy good reputation.

Our service:

(1)You can order online from us for 24 hours, 7 days.

(2)Our experienced staff answer all your questions in professional and fluent English.

(3)OEM&ODM products and customized design are available and welcomed.

(4)We can make sure that our customers receive the hundreds of orders daily from our warehouse on time and as promised. 

1.Before placing order, can we make sample firstly?

Sample can be arranged to send to you to test before placing order.

Sometimes sample is free ,sometimes sample charge should be included if more than 3 pcs with material .

But we are afraid freight charge will be paid by yourself.

Certainly, we will adjust additional sample and freight charges into your bulk order.

2.How can I get your sample?

Of course, we can send you some samples. Most samples are free, but sometimes we will take small sample fees.

Maybe you also send us your DHL or EMS/UPS/TNT etc account ,so you can pay for air freight to your carrier company directly.

3.Whether we can print our logo or need our color or size or not?

Yes, because we have our own factory and R&D team, so we can make products as your demands.

We can print your logo, we also can make as your size and print it as your color.

4.How many kinds of payment terms you can accept?

About payment terms, we would like 100%TT if less than $1000.00

Usually for bulk order , would like can be paid pay 30%- 50% advanced payment and the rest should be paid before dispatch.

We hope this information will be helpful to you, if you have any question, please feel free to contact us, we are always at your service.