Specifications

PE Series Mining Machinery
1.simple structure
2.high crushing ratio
3.stable operation
4.low operation cost

Jinma Jaw Crusher series are based on years' experience and technology development. The continuous improvement and refinement has made them the preferred jaw crusher for professionals and our customers. They can meet most crushing requirements in primary and secondary crushing, and the largest compression resistance of the material is 320MPa. This series are widely used in stone mining, metallurgical, construction, smelting, hydraulic and chemical industries, etc.

Working Principle of Jaw Crusher:
The motor transmits power through belt, drives the moving jaw to do periodic motion towards the fixed jaw by the eccentric shaft. The angle between toggle plate and moving jaw plate increases when moving jaw moves. So the moving jaw moves towards the fixed jaw. The stuff will be crushed in this process. The angle between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw moves leaves fixed jaw by pulling rod and spring, the final crushed stuff will be discharged from the outlet.

Characteristics of Jaw Crusher:
-High crushing ratio
-Even product granularity
-Simple structure
-Wide ranges of choices
-Reliable working condition
-Convenient maintenance.

 

 

crusher technical parameters

Model	Max feed size (mm)	Discharge Size(mm)	Capacity (T/h)	Power (KW)		mainshaft Speed(r/min)	Weight (T)
PEF150×250	125	10-40	1-3	Y2-132S-4	5.5	285	0.7
PEF200×300	180	20-70	2-8	Y2-160M-4	11	285	0.8
PEF-250×400	210	20-80	4-14	Y2-180L-6	15	310	2.8
PEF-400×600	350	40-160	20-120	Y2-250M-8	30	300	6.5
PEF500×750	425	50-100	40-110	Y2-280M-6	55	275	11.3
PEF-600×900	480	72-200	56-192	JR117-8	75	255	17.6
PEF750×1060	630	80-200	100-250	JR117-8	90	250	29
PEF900×1200	750	95-200	120-280	JR117-8	110	250	50
PEF1000×1200	850	110-260	180-340	JR117-8	130	200	53
PEF1200×1500	1020	150-300	300-500	JR117-8	160	180	101
PEX-150×750	120	8-25	10-40	Y2-180L-6	15	300	3.5
PEX-250×750	210	12-35	15-50	Y2-280S-8	30	300	5.5
PEX-250×1000	210	12-50	30-95	Y2-250M-8	37	300	6.5
PEX-250×1200	210	12-50	40-100	J2-280M-8	37	300	8.8
		12-70
PEX-350×750	300	15-50	20-50	Y2-315M-8	30	250	6.5
PEX-300×1300	250	20-90	45-130	Y225M-6	75	250	11

For further details, please feel free to contact

Tel: 86-371-67511057   Mobile: 86-371-13523521812

Fax: 86-371-6751257