Product Details

Touch screen intelligent three zone thermal impact tester, thermal impact machine, thermal impact equipment

Product Description

Three zone thermal impact tester is also known as hot and cold impact testing machine, used to test

or composite material structure, in an instant by the extremely high temperature and low temperature under continuous environment can endure degree, in order to test in the shortest possible time chemical changes caused by heat bilges cold shrink or physical damage. Applicable to metal and plastic, rubber, electronic...Such as material, can be used as the basis of its product improvements or reference.

three zone thermal impact tester
Equipment specification	TGDCJ-80AB	TGDCJ-150AB			TGDCJ-250AB	TGDCJ-512AB		TGDCJ-010AB
Workroom Dimensions (cm)	50x40x40	60x50x50			70x60x60	80x80x80		100x100x100
Temperature Range	A: -20°C-150°C B: -40°C-150°C C: -60°C-150°C D: -80°C-150°C
Fluctuation/Evenness	±0.5°C/±2°C
Conversion time	5s
Recovery time	5min
Time needed for heating	RT°C~200°C≤30min
Time needed for cooling	RT°C~-65°C≤60min
The low temperature zone temperature range	-65°C ~ -10°C
High temperature control	RT+10°C ~ 200°C
The machine noise	≤72 dB(A)
Load on the largest	≤20kg
Equipment installed power	~21.5KW		~25.5KW	~32.5KW			~36.5KW	~42.5KW
material	The studio:# SUS 304 stainless steel			The outer wall:Cold plate coating/#SUS304
Wind Cycling Way	Centrifugal fan-broadband type forced air circulation
Refrigeration Way	Single stage compression refrigeration
Refrigerater	French Tecumseh
Refrigerants	R4O4A USA Dupont environmental protection refrigerant(R404A & R23)
Condensing Way	Air-cooled or water-cooled
Heater	Nickel chrome heating wire heater
Water Suplying Way	Automatic cycling water supply
Control instrument	OYO-8226P or HLS980
Design criteria	GJB150.5 GJB360.7 GB/T2423.22 GB10589-89 GB11158-89
Standard Accessories	1 Observe window(double-deck cavity toughened glass), 1 50mm test hole in the left, 1 PL inner chamber lamp, 2 The sample is put aside frame 1 bag of wet and dry bulb, 3 fuses, 1 power line.
Safety device	Non- fuse-switch(compressor overload, refrigerant high low voltage, over-humidity and temperature protection, Protection switch,fuse stoppage warning system

Packaging & Shipping