Manufacturers liquid testing thermal shock machine with three zone
USD $10,000 - $17,000 /Set
Min.Order:1 Set
Wuxi Harris Environment Equipment Co., Ltd.
Thermal shocking machine is also known as hot and cold impact testing machine, used to test or composite
material structure, in an instant by the extremely high temperature and low temperature under continuous environment can endure degree, in order to test in the shortest possible time chemical changes caused by heat bilges cold shrink or physical damage. Applicable to metal and plastic, rubber, electronic...Such as material, can be used as the basis of its product improvements or reference.
Liquid testing thermal shock machine | |||||||||
Equipment specification | TGDCJ-80AB | TGDCJ-150AB | TGDCJ-250AB | TGDCJ-512AB | TGDCJ-010AB | ||||
Workroom Dimensions (cm) | 50x40x40 | 60x50x50 | 70x60x60 | 80x80x80 | 100x100x100 | ||||
Temperature Range | A: -20°C-150°C B: -40°C-150°C C: -60°C-150°C D: -80°C-150°C | ||||||||
Fluctuation/Evenness | ±0.5°C/±2°C | ||||||||
Conversion time | 5s | ||||||||
Recovery time | 5min | ||||||||
Time needed for heating | RT°C~200°C≤30min | ||||||||
Time needed for cooling | RT°C~-65°C≤60min | ||||||||
The low temperature zone temperature range | -65°C ~ -10°C | ||||||||
High temperature control | RT+10°C ~ 200°C | ||||||||
The machine noise | ≤72 dB(A) | ||||||||
Load on the largest | ≤20kg | ||||||||
Equipment installed power | ~21.5KW | ~25.5KW | ~32.5KW | ~36.5KW | ~42.5KW |
| |||
material | The studio:# SUS 304 stainless steel | The outer wall:Cold plate coating/#SUS304 |
| ||||||
Wind Cycling Way | Centrifugal fan-broadband type forced air circulation |
| |||||||
Refrigeration Way | Single stage compression refrigeration |
| |||||||
Refrigerater | French Tecumseh |
| |||||||
Refrigerants | R4O4A USA Dupont environmental protection refrigerant(R404A & R23) |
| |||||||
Condensing Way | Air-cooled or water-cooled |
| |||||||
Heater | Nickel chrome heating wire heater |
| |||||||
Water Suplying Way | Automatic cycling water supply |
| |||||||
Control instrument | OYO-8226P or HLS980 |
| |||||||
Design criteria | GJB150.5 GJB360.7 GB/T2423.22 GB10589-89 GB11158-89 |
| |||||||
Standard Accessories | 1 Observe window(double-deck cavity toughened glass), 1 50mm test hole in the left, 1 PL inner chamber lamp, 2 The sample is put aside frame 1 bag of wet and dry bulb, 3 fuses, 1 power line. |
| |||||||
Safety device | Non- fuse-switch(compressor overload, refrigerant high low voltage, over-humidity and temperature protection, Protection switch,fuse stoppage warning system |
|