Product Details

Temperature and Humidity Test Chamber supporting calibration

Product Description

Temperature and humidity test chamber is simulation under the condition of product in humidy climate environment combination (high and low temperature operation & storage, temperature cycle, high temperature and high humidity, low temperature and humidity and condensation test, etc.), check whether the adaptability and characteristics of the product itself.

Does need to be met the requirements of international standard (IEC, JIS, GB, MIL...).International quantum measurement procedures in order to achieve consistency (including test steps, conditions, methods) to avoid different cognitive, and narrowing the scope of measurement uncertainty.

Temperature and humidity test chamber

Specification

THS-100UA

THS-150UA

THS-250UA

THS-500UA

THS-010UA

Workroom Sizes W*D*H (cm)

50x40x50

50x50x60

60x60x70

80x70x90

100x100x100

Inner chamber volume(V)

100L

150L

252L

504L

1000L

Outer dimension W*D*H(cm)

98x95x160

98x105x170

108x112x180

128x125x200

148x155x210

Packing Size

113x110x175

113x120x185

123x127x195

133x140x215

163x160x225

G.W(kg)

360

390

450

480

620

Temperature Range

A: -20°C-150°C B: -40°C-150°C C: -60°C-150°C D: -70°C-150°C

Temperature Fluctuation

≤±0.5°C(standard)/≤±0.2°C(optional)

Temperature Evenness

≤±2°C

Temperature Deviation

≤1°C

Accuracy

0.1°C,1.5%R.H (standard)/0.01℃,1.5%R.H(optional)

Humidity Range

20%~98%R.H/ 10%~98%R.H(optional)

Humidity Deviation

±2% R.H

Temperature Rise Speed

1.0°C~3.0°C/min

Temperature Down Speed

0.7°C~1.2°C/min

Time needed for heating

RT°C~150°C≤30min

Time needed for cooling

RT°C~-40°C≤60min

The machine noise

72 dB(A)

Load on the largest

100kg,≤20kg/layer

150kg,≤26kg/layer

260kg,≤30kg/layer

260kg,≤40kg/layer

300kg,≤60kg/layer

Equipment installed power

~3.25KW

~3.55KW

~3.95KW

~5.5KW

~6.25KW

material

Inner chamber:# SUS 304 stainless steel

The outer wall:A3 carbon steel plate with plastic spray/#SUS304

Wind Cycling Way

Centrifugal fan forced air circulation

Refrigeration Way

Single stage compression refrigeration

Refrigerater

French Tecumseh

Refrigerants

R4O4A USA Dupont environmental protection refrigerant

Condensing Way

Air-cooled or water-cooled

Heater

Nickel chrome heating wire heater

Humidifier

Semi-closed steam and wet

Water Suplying Way

Automatic cycling water supply

Controller

Japan OYO/Korea Temi

Standard Accessoriesparts

1 Observe window(double-deck cavity toughened glass),50mm testing hole,PL internal bulbs,partition plate,dry and wet ball gauze,3 fuses,1 power line

Safety device

Compressor overload protection, fuse protection, Overheat protection,humidifier dry-combustion protection ,high/low pressure of refrigerator ,over-humidity and temperare protection,water shortage protection,over-current protection,Over-current circuit breaker,earth leakage protection

Applications of temperature&humidity testing machine:

Packaging & Shipping