Customizable rapid temperature cycling test chamber
USD $26,000 - $27,000 /Set
Min.Order:1 Set
Wuxi Harris Environment Equipment Co., Ltd.
Rapid temperature cycling test chamber is suitable for electronic elements of safety performance test provide reliability test, rapid temperature test box product screening test, etc., at the same time, through this equipment test, can improve the reliability of products and product quality control.
Specification | TKWB-CS | TKWB-DS | ||||||||
Workroom Sizes W*D*H (cm) | 60x80x85 | 100x80x100 | ||||||||
Inner chamber volume(V) | 408L | 800L | ||||||||
Outer dimension W*D*H(cm) | 141x221x220 | 181x234x235 | ||||||||
Temperature Range | -70~-150°C(KS); -40~-150°C(KL); +20~-150°C(KR) | |||||||||
Temperature Fluctuation | ≤±0.5°C(standard)/≤±0.2°C(optional) | |||||||||
Temperature Evenness | ≤±2°C | |||||||||
Temperature Deviation | ≤1°C | |||||||||
Accuracy | 0.1°C,1.5%R.H (standard)/0.01℃,1.5%R.H(optional) | |||||||||
Temperature rapid change range | -70°C model:-50~+85°C(KS),-40°C model:-20~+85°C(KL),-20°C model:0~+85°C(KR) | |||||||||
Temperature Rise Speed | 3°C/min,5°C/min,8°C/min,10°C/min,15°C/min linear or nonliear | |||||||||
Temperature Down Speed | 3°C/min,5°C/min,8°C/min,10°C/min,15°C/min linear or nonliear | |||||||||
Time needed for heating | -70~-150°C<60min; -40~-150°C < 50min; +20~-150°C < 35min | |||||||||
Time needed for cooling | +20~-70°C < 70min; +20~-40°C < 55min; +20~-20°C < 35min | |||||||||
The machine noise | 72 dB(A) | |||||||||
material | Inner chamber:# SUS 304 stainless steel | The outer wall:A3 carbon steel plate with plastic spray/#SUS304 | ||||||||
Wind Cycling Way | Centrifugal fan forced air circulation | |||||||||
Refrigeration Way | Single stage compression refrigeration | |||||||||
Refrigerater | French Tecumseh | |||||||||
Refrigerants | R4O4A USA Dupont environmental protection refrigerant | |||||||||
Condensing Way | Air-cooled or water-cooled | |||||||||
Heater | Nickel chrome heating wire heater | |||||||||
Water Suplying Way | Automatic cycling water supply | |||||||||
Controller | Japan OYO/Korea Temi | |||||||||
Standard Accessories parts | 1 Observe window(double-deck cavity toughened glass),50mm testing hole,PL internal bulbs,partition plate,dry and wet ball gauze,3 fuses,1 power line | |||||||||
Safety device | Compressor overload protection, fuse protection, Overheat protection,humidifier dry-combustion protection ,high/low pressure of refrigerator ,over-humidity and temperare protection,water shortage protection,over-current protection,Over-current circuit breaker,earth leakage protection |
Application: