Product Details

Hot selling hot cold cycling test chamber factory direct supply

Product Description

Brief introduction:

Hot cold cycling test chamber is also known as hot and cold impact testing machine, used to test

or composite material structure, in an instant by the extremely high temperature and low temperature under continuous environment can endure degree, in order to test in the shortest possible time chemical changes caused by heat bilges cold shrink or physical damage. Applicable to metal and plastic, rubber, electronic...Such as material, can be used as the basis of its product improvements or reference.

Parameter of hot cold cycling test chamber:

Hot cold cycling test chamber

Specification

TGDW-100UA

TGDW-150UA

TGDW-250UA

TGDW-500UA

TGDW-010UA

Workroom Sizes W*D*H (cm)

50x40x50

50x50x60

60x60x70

80x70x90

100x100x100

Inner chamber volume(V)

100L

150L

252L

504L

1000L

Outer dimension W*D*H(cm)

98x95x160

98x105x170

108x112x180

128x125x200

148x155x210

Packing Size

113x110x175

113x120x185

123x127x195

133x140x215

163x160x225

G.W(kg)

340

370

430

460

600

Temperature Range

A: -20°C-150°C B: -40°C-150°C C: -60°C-150°C D: -80°C-150°C

Temperature Fluctuation

≤±0.5°C(standard)/≤±0.2°C(optional)

Temperature Evenness

≤±2°C

Temperature Deviation

≤1°C

Accuracy

0.1°C(standard)/0.01℃(optional)

Temperature Rise Speed

1.0°C~3.0°C/min

Temperature Down Speed

0.7°C~1.2°C/min

Time needed for heating

RT°C~150°C≤30min

Time needed for cooling

RT°C~-40°C≤60min

The machine noise

72 dB(A)

Load on the largest

100kg,≤20kg/layer

150kg,≤26kg/layer

260kg,≤30kg/layer

260kg,≤40kg/layer

300kg,≤60kg/layer

Equipment installed power

~1.95KW

~2.35KW

~2.85KW

~3.5KW

~4.35KW

material

Inner chamber:# SUS 304 stainless steel

The outer wall:A3 carbon steel plate with plastic spray/#SUS304

Wind Cycling Way

Centrifugal fan forced air circulation

Refrigeration Way

Single stage compression refrigeration

Refrigerater

French Tecumseh

Refrigerants

R4O4A USA Dupont environmental protection refrigerant

Condensing Way

Air-cooled or water-cooled

Heater

Nickel chrome heating wire heater

Controller

Japan OYO/Korea Temi

Design criteria

GJB150.3 GJB150.4 GB/T2423.22 GB10589-89 GB11158-89

Standard Accessoriesparts

1 Observe window(double-deck cavity toughened glass),50mm testing hole,PL internal bulbs,partition plate,dry and wet ball gauze,3 fuses,1 power line