Specifications

Stainless steel air shower room:
1)Automatic door
2)Automatic blowing
3)100 class cleanroom
4) Wind speed:22-25/s

Stainless steel air shower room wiith automatic sliding doors

 

Description:

 

Air shower room is a kind of partial clean equipment which is installed at the partition between the clean and non-clean rooms.

It’s used for people and goods to shower before entering the clean area. After using it, the dust could effectively be reduced to

enter the clean area and maintain the normal working status.

 

We can assembly air showers or passages in various lengths as per the number of people that may enter into the clean room.
Shower means: one side shower, double sides shower, three sides shower, top shower.

 

Features:

 

1. The control system: LCD control panel with human voice, electronic interlock and automatic blowing

 

2. Air shower time from 0 to 99 seconds which can be adjustable

 

3. Adopt Pre filter and HEPA filter

 

4. Material: cold rolled steel with powder coated or stainless steel 201 or 304

 

5. The door, bottom-board, nozzles are used of stainless steel, good appearance.

 

6. When air shower is used to pass cargo, it is without bottom-board.

 

Optional accessory:

 

1. Double-leaf or single-leaf  Automatic-sliding doors by photoelectric sensor (when person enter air shower, the door will open automatically, go out air shower,

the door will be closed automatically.)

 

2. HEPA filter or ULPA filter

 

3. Material: cold-rolled steel plate / all stainless steel air shower / just stainless steel inside

 

4. Common fluorescent lamp / UV Sterilizer lamp   

 

5. Control system: Omron or MItsubishi PLC

 

6. EBM fan

 

Standard size and specification:

 

Model	Air shower					Cargo Air shower
	ZS-FL-1300	ZS-FL-1540A	ZS-FL-1540	ZS-FL-1540-1D		ZS-FL-2000 (2D)	ZS-FL-2300- (5D)
External dimensions (mm)	1150x800x 2000	1400x1000x 2000	1400x1200x 2000	1400x1600x 2000		1800x2000x2000	2100x5000x 2000
Dimensions in WxHxD(mm)	800x750x 1920	800x950x 1920	800x1150x 1920	800x1550x 1920		1200x1950x 1920	1500x4950x 1920
Material for case	Cold rolled steel with powder coated , SUS#201 or SUS#304
Suitable person	1	1	1-2		2-3	Cart
Nozzles	6(one side)	12(two sides)	16(two sides)		18(two sides)	24(two sides)	60(two sides)
Blow power(W)	550	1100	1500		2000	2200	7500
Weight(kg)	Appro.250	Appro.400	Appro.600		Appro.900	Appro.1200	Appro.2800
HEPA filter’s dimensions	550x610x69 One piece	610x610x69 two piece	610x610x69 two piece		610x610x69 two pieces	610x610x69 four pieces	610x610x69 Ten pieces
Nozzle diameter	38mm
Air shower time	0~99s Adjustable
Spurt wind speed	20~25m/s
Voltage	380V/50Hz/3Ph; 220V/50Hz/1Ph
Filter efficiency	Above 99.99% efficient on 0.3um particles
Control system	LCD control panel, electronic interlock and automatic blowing