Product Details

Ultrasonic liquid control inline flow meter with printer

Product Description

Introduction of inline flow meter

GXUF6000I series flow meter usually is used to long-term measure at field. It’s easy to operate and easy to install without cut off the pipe.
Both the sensor and the host can be installed on the pipes. The protect grade is IP68. GXUF6000I also can use as a calorimeter, if the temperature sensor is added.

Features

Feartures of flow meter

High accuracy up to 1%
Wide range of flow rate and pipe diameter DN15 to DN6000
High reliability up to 10 years
Robust design
Huge storage function
Remote transmission and net work transmission
Easy to used for calorimeter

Applications

Applications of liquid control flow meter

Specifications

Parameter of ultrasonic liquid control inline flow meter

Parts	Detail
Host part	Theory	Ultrasonic time gap
	Accuracy	±1%
	Option method	4-keyboard support magnetic
	Signal output	1 channel 4~20mA @ 0.1% current loop back, the maxim load resistor up to 1000 ohm
		1 channel OCT pulse output (default pulse width is 200ms, and can be modify between 6 to 1000ms)
		1 channel relay output (3A@220V)
	Signal input	3 channel 4-20mA current loop back @0.1% circuit used to collect Temp. Pressure and liquid level etc.
	Signal input	1 channel mV input use to pt100 for calorimeter
	Digital port	RS485 support Mod-bus protocol and support firmware update
Cable	Special cable for RS485 the range up to 1000m
Suit pipe	Pipe material	Steel, cast iron cement, copper, PVC, Aluminum, glass, etc.
	Dimension	15~6000mm
	Sensor position	It is better the sensor fix at the position of at least 10D far away to stream, or 5D far away to stream, at least 20D far away from the pump outlet.
Suit flow	Media	Water, sea water, waste water, liquid alcohol, beer, gas, oil, etc.
	Temperature	-30~160°C
	Turbidity	10000pm not so much baubles
	Flow speed	0~±10m/s
Environment	Temperature	Host: -20~60°C; Sensor: -30~160°C
Environment	Humidity	Host: 85%RH; Flow sensor: IP68, less than 2m under water
Power supply	DC8~36V or AC85~265V(optional)
Consumption	1.5W

Installation type

Company Information

GUANGXING pressure, level and flow Instruments has been certified with ISO 9001 (2008)achieved GB/T19001-2008/ISQ9001:2008, GJB 9001B-2009, CE and RoHS, intrinsic safety explosion-proof and isolated safety explosion-proof certification. we developed a lot of sensor products, such as a pressure sensor / transducer / sensor, level transmitter / ultrasonic level meter / ultrasonic flow meter, etc. Our products are widely applied in the fields of chemical industry, petroleum, pharmacy, electricity, municipal works, environmental protection, food and paper-making.

We have the key technology and development center of advanced sensors, and we cooperation with Northwestern Polytechnical University, Xi'an Jiao Tong University and other colleges and universities. Product quality is the life of enterprise, customer demand is our existence!