Specifications

Rated voltage 220VAC , 50Hz
equipment load < 300W
static power <0.5W
Two-way communication up time < 2s

Features:

l           Replace conventional switches , replacing mechanical buttons with touch screen , longer life.

l           LED backlight touch buttons for switch control,address code of lights is clear to see.

l           Assorted many colors available so that to personalized the product.Gorgeously appearance is right down your decoration.

l           The words displayed on the panel could be change according to customer’s require.

l           Bidirectional communication by power line in high speed with the feedback function

l           Can be installed in any 86 -style junction box , socket panel ; ultra-thin design .Dimensions : 86X86X39mm

l           Simple setup, six seconds to complete the study; equipped with powerful noise suppression circuit.

l           Touch switch control Fluorescent Lamp respond all ON & all OFF;touch switch control appliance only respond all OFF.

Technical Specifications:

l           Rated voltage 220VAC ± 10%, 50Hz ;equipment load ≤ 1000W

l           static power ≤0.5W  ;ambient temperature: -10~50°C

l            Two-way communication up time ≤ 2s

Usage: You can control light or appliance  through the following control methods after address setup.

1 . After connected to the wires, to realize local control.

 (1). Press " ON": the light/appliance will be open.At the same time the LED indicator light of “ON” will lighted and the color of the words displayed on the panel is blue . The LED indicator light will go out of itself without any operation in 10s.

(2)Press “OFF”: the light/appliance will be closed.At the same time the LED indicator light of “OFF” will lighted and the color of the words displayed on the panel is red . The LED indicator light will go out of itself without any operation in 10s.

2. Any high-speed bidirectional power line controller can control the switch, such as : wireless remote control, wall centralized control,telephone controller or intelligent control center etc.

Project Installation:

Connect and install it by the professional persons as the wiring diagram. Avoid injury to people and products.

l           Cut off the power before installation ; according to the label for wiring module.

l           Touch switch’s "L"connects with Live wire.

Touch switch’s "N" connects with Neutral wire