Product Details

Specifications

Rated voltage 220VAC , 50Hz
equipment load < 1000W static power <0.5W
Two-way communication up time < 2s

Features:

l Replace conventional switches , replacing mechanical buttons with touch screen , longer life.

l LED backlight touch buttons for switch control,address code of lights is clear to see.

l Assorted many colors available so that to personalized the product.Gorgeously appearance is right down your decoration.

l The words displayed on the panel could be change according to customer’s require..

l High speed bidirectional power line signal transmission with feedback function.

l Can be installed in any 86 -style junction box , socket panel ; ultra-thin design .Dimensions : 86X86X39mm

l Simple setup, six seconds to complete the study; equipped with powerful noise suppression circuit.

l Touch switch control the big power Lamp respond all ON & all OFF.

Technical Specifications:

l Rated voltage 220VAC ± 10%, 50Hz ;equipment load ≤ 1000W

l static power ≤0.5W ;ambient temperature: -10~50°C

l Two-way communication up time ≤ 2s

Address settings: ( Please read high-speed bidirectional power line controller's use guide firstly.)

There are two button on the touch panle , divided into left and right keys ,to control one way lights or appliances . Each row of text from left to right are: “ON”,the room’s name (for example Living Room &The Main Light) ,“OFF”.

Press the " ON " button continuously 5s. The state of panel text as: the LED indicator of “ON ” is displayed as blue . Middle light or appliance name appears as blue , and then flashes twice , the way of lights were control to open, enter the learning state .

Now use the controller ( such as : TDXE6648 remote ) to send the relevant signals:

Address settings : use the controller (such as : TDXE6648 remote control ) to send the relevant address code (such as : choose “E01” as the ' master bedroom ' address code ) and press down " ON " , the power of the touch screen switch will off when the address signal is received, study success.

2.If you do nothing in 10s, the LED indicator light will automatically goes into “power saving mode ”. When you need operate the switch ,just touch anywhere of the switch panel randomly, then the LED indicator light will lighted to show the current work state of lights

/appliance. For example the current light is "ON" state , the " ON" button is blue,if you need close the light/appliance ,just press “OFF” , then the switch will enter the relevant control state.

Note: If you do nothing in 30s after entering into operation,the switch will exit “addresses setting state” and go back to initial state : P01.The touch switch without function setting, the switch will not respond all on.

Usage: You can control light or appliance through the following control methods after address setup.

1 . After connected to the wires, to realize local control.

(1). Press " ON": the light/appliance will be open.At the same time the LED indicator light of “ON” will lighted and the color of the words displayed on the panel is blue . The LED indicator light will go out of itself without any operation in 10s.

(2)Press “OFF”: the light/appliance will be closed.At the same time the LED indicator light of “OFF” will lighted and the color of the words displayed on the panel is red . The LED indicator light will go out of itself without any operation in 10s.

2. Any high-speed bidirectional power line controller can control the switch, such as : wireless remote control, wall centralized control,telephone controller or intelligent control center etc.

Project Installation: