Specifications

Rubber Belt Making Machine / Conveyor Belt Vulcanizing Machine
1.100% real Factory
fessional for vulcanizer
3.CE SGS

 Professional Rubber Belt Making Machine /Conveyor Belt Vulcanizing Machine

 

Main customers

       Our products have been exported to all around the world, such as America, France, Canada,  Australia, Southeast Asia, and the Middle East. With the best quality and service, they have gained   great  praise from domestic and foreign customers.

Structures 

   1). Rubber belt vulcanizing machine is  controlled by PLC and touch screen for manual control and auto control. The auto control can realize many auto works such as mould closing, air exhausting, temperature control, vulcanization timing, alarming and discharging load when mould opening etc; the touch screen will timely show the temperature of the heating platen at each heating zone.

   2) .The hydraulic cylinder is made of ZG270-500, the ram is made of close-grained chilled alloy cast iron by casting and fine grinding; the hydraulic cylinder is well sealed by YX shape sealing ring.

   3).The guard edge of heating platen adopts hydraulic pressure automatic prop up iron, under the function of four oil cylinder, the iron cushion at two sides of the lower platen will advance and retreat at the same time; there are anti-superpose iron cushion device at the two sides of platen.

   4) .There is a set of valve group of temperature adjuster on each heating area for the platen. Under the controlling of PLC, it can guarantee the even temperature of each heating area.

   5) .Hydraulic pressure system: We adopt the famous brand hydraulic pressure station from the domestic and abroad, under the controlling of PLC, it can realize the auto mould closing, air exhausting and load discharging when opening mould.

   6).The inphase balance device of the machine: there is an axis that runs through the machine sets below the platform, gear wheels and racks are designed on the two sides of the axis, which can guarantee the horizontal lifting for the platform.

Technical Parameters

Four column type curing press:

Type	XLB-DQ400*400*2	XLB-DQ600*600*2	XLB-DQ750*850*2	XLB-DQ1000*1000*2	XLB-DQ1500*1500*2	XLB-DQ300*300*2
Total pressure	0.50 MN	1.00 MN	1.60 MN	4.00 MN	8.00 MN	0.25 MN
Plate size	400*400 mm	600*600 mm	750*850 mm	1000*1000 mm	1500*1500 mm	300*300 mm
Plate clearance	125 mm	125 mm	125 mm	125 mm	125 mm	125 mm
Working layer nuber	2	2	2(4)	2(4)	2(4)	2
Piston stroke	250 mm	250 mm	250(500)	250(500)	250(500)	250 mm
Plate pressure	3.1 Mpa	2.8 Mpa	2.5 Mpa	4.0 Mpa	3.6 Mpa	2.1 Mpa
Motor power	2.2 kw	3 kw	3 kw	5.5 kw	5.5 kw	2.2 kw
weight	1300 kg	3500 kg	6500 kg	11000 kg	22000 kg	1050 kg

 

Frame Type curing press:

Type	XLB-DQ1200×1200×2	XLB-DQ1300×2000×1	XLB-Q1200×2500×1	XLB-Q1500×2000×1	XLB-Q2000×3000×1	XLB-Q1400×5700×1
Total pressure(MN)	315t	560t	750t	1000t	1800t	2800t
Plate size(mm)	1200×1200	1300×2000	1200×2500	1500×2500	2000×3000	1400×5700
Daylight(mm)	200	400	400	400	400	400
Layer	2	1	1	1	1	1
Piston stroke(mm)	400	400	400	400	400	400
Plate unit area pressure (kg/ cm2)	22	21.5	25	33.5	30	35
Main motor power(KW)	3	8	9.5	11	26	43.5
Overall dimension (L×W×H)(mm)	1685×1320×2450	2000×1860×2500	2560×1700×2780	2810×1550	2900×3200×2860	2400×5800×3600
Weight (kg)	9500	17000	20000	24000	66000	110000

Picture show