Summary:

        XLB - Q1400 x10000 x 2 plate vulcanizing press production line is mainly used in the flat rubber vulcanization fabric conveyor belt.

AUXILIARY STRUCTURE CHARACTERISTICS:

1. Guiding device:
Through the huge volume and guide to open structure consisting of an organic whole, lock disc guide at the beginning, torque motor drives the take-up placemat, in guarantee under the condition of invariable linear speed automatic speed control;

2. Before and after clamping and clamping tensile device
The device consists of a steel plate and steel welded together, the structure form is frame type structure. Under the clamping device is mainly composed of frame, upper and lower splint, clamping cylinder, etc. Stretching part by tensile girder, two drawing of cylinder.

3. Traction unit: from vertical roller, frame, etc; Knurling roller surface, increase with traction.

4. Repairing machine: a small vulcanizing machine, when products. Local defects repair.
5. take-up device: the motor drives the single roller coiling, roller are installed on the rim device.

Four, hydraulic system, hydraulic components adopt domestic famous brands.

MAIN PERFORMANCE PARAMETERS OF THE PARTS

Main machine:
XLB - Q1400X10000 x 2 for single frame plate vulcanizing machine, it is made up of frame, base,

hydraulic cylinder, plunger, movable platform, beams, hot plate, up and down on the synchronous

mechanism, etc.

Main technical parameters are as follows:

1,Nominal clamping force          3500Ton

2,Pressure per unit area            2.5N/mm²

3,Working liquid pressure          17.1MPa

4,Hot plate size                  1400X10000X80mm

5,The layer number of hot plate       2

6,Hot plate spacing               250mm

7,Plunger diameter               φ500mm

8,Plunger stroke                  450mm

9,Number of cylinders              20

10,Hot plate up and down speed     up≥6mm/s   down≥3mm/s

11,The inlet cooling range         300mm

12,Cooling range at the exit       200 or 300mm

13,The control mode             Automatic unloading

14,Heating mode                Hot steam  

AUXILIARY MACHINE

1,Guiding device:

Guide to open device is supported by the strip part and integration of patch winding parts

structure. The frame adopts steel welding structure.

(1)Core working length of the rolls 1400mm

(2) Core roller diameter 320mm

(3) Motor 40N.m

2,Curling device

Traction device consists of upper and lower roller, frame, bearing and gear, etc. Roll up and down the working face of knurling, in order to increase roller with traction.

(1)  motor power 5.5kw

(2) Traction roll diameter 280mm

(3) Maximum width 1400mm

3,Clamping device and Stretching device

Clamping device and Stretching device with steel plate and steel welded together. The clamping part is mainly composed of frame, upper and lower splint, clamping cylinder, etc. The Stretching device consists of beam, stretching cylinder, etc.

(1)  Clamping force 0.8MN

(2)  Clamping stroke 300mm

(3)  Tensile force 0.7MN

(4)  Stretching schedule 1000mm

(5)  Clamping plate specification 1400×400mm

4,Coiling device

(1)  Coiling diameter 320mm

(2)  Coiling Max width 1400mm

(3)  Coiling power 7.5KW

5,Repairing machine

Repairing machine is one small plate vulcanizing machine which can repair the belt when there’s local defect after vulcanization. There’s cooling area on the two sides of hot plates.

(1) Clamping force 2.4MN

(2)  Unit pressure 3N/mm2

(3)  Diameter of plunger 300mm

(4) Plunger quantity 2pcs

(5)  Hot plate specification 1400×500×60mm

(6)  Hot plate layer 1 layer

(7)  Hot plate spacing 300mm

(8)  Controlling way manual

(9)  Heating way steam, water manual control

(10)  Working liquid pressure 17MPa