Specifications

1. Has high magnetic conductivity
2. Have ISO9001:2008 Certificate
3. Supply ROHS,Test Report
4.Professional manufacturers

 

 

 

 

Monel® Alloy 400

UNS N04400

Other common names: Alloy 400

 

Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions. This nickel alloy is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. As would be expected from its high copper content, alloy 400 is rapidly attacked by nitric acid and ammonia systems.

 

Characteristics

Resistant to seawater and steam at high temperatures

Excellent resistance to rapidly flowing brackish water or seawater

Excellent resistance to stress corrosion cracking in most freshwaters

Particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated

Offers some resistance to hydrochloric and sulfuric acids at modest temperatures and concentrations, but is seldom the material of choice for these acids

Excellent resistance to neutral and alkaline salt

Resistance to chloride induced stress corrosion cracking

Good mechanical properties from sub-zero temperatures up to 1020° F

High resistance to alkalis

 

Chemical Composition, %

C: 0.30 max  Mn: 2.00 max  S: 0.024 max  Si: 0.50 max  Ni: 63.0 min  Cu: 28.0-34.0  Fe: 2.50 max

 

 

Note: The values in the table are for reference only.

Specification: Plate, sheet, strip, rod, bar, wire, tube.

We are looing forward to cooperate with you!