1. Fractional resurfacing is a new laser treatment modality that creates numerous microscopic thermal injury zones of controlled width, depth,and density that are surrounded by a reservoir of spared epidermal and dermal tissue,allowing for rapid repair of laser-induced thermal injury. This unique modality, if implemented with proper laser- delivery systems, enables high-energy treatments while minimizing risks.
   2.This machine use the RF Tube manufacturerd by Coherent America,the frequency can reach more than5000HZ,the high speed can work more efficiecnt and effectively,it is very good for the ultra pulse incision for the precise surgey,no blood,the treatment area is very clear,andless down time.

2. 
   

1. Fractional resurfacing is a new laser treatment modality that creates numerous microscopic thermal injury zones of controlled width, depth,and density that are surrounded by a reservoir of spared epidermal and dermal tissue,allowing for rapid repair of laser-induced thermal injury. This unique modality, if implemented with proper laser- delivery systems, enables high-energy treatments while minimizing risks.
   2.This machine use the RF Tube manufacturerd by Coherent America,the frequency can reach more than5000HZ,the high speed can work more efficiecnt and effectively,it is very good for the ultra pulse incision for the precise surgey,no blood,the treatment area is very clear,andless down time.

2. 
   

Specifications

1.Wavelengths: 10600nm
2.acne,scar treatment,tatto removal
3CE ISO9001&13485 Certificate

Treatment of CO2 Fractional Laser/medical laser beauty machine:

CO2 Fractional laser technology is a kind minimal invasive treatment between invasive and noninvasive, which is the latest and hottest skin care technology in USA and its also the most often talked about by dermatology community for these two years in the world. It was first published in 2004 by laser medical expert of Harvard University, Dr. Rox Anderson, who based on the Fractional photothermolysis therory. Than its immediately recognized by experts all over the world and rapidly applied to clinical treatment. Fractional photothermolysis theory is an extension of traditional Selective Photothermolysis theory. It combines the advantages of invasive treatment and non-invasive treatment, so it is a kind of rapid treatment with prominent effects, little side effects and shorter period of recovery. Fractional laser treatment is by the means of punching evenly tiny holes in the skin by using laser, then arouse a series of biochemical reactions of skin to achieve skin tighteding, skin rejuvenation and pigmentation removal. Fractional laser teratment will only cover part of skin tissues, and the new small holes are not overlapped mutually, so part of normal skin will be retained and speed up to recover. Patient can return to normal lif after 4-5 days.

The Range of Treatment:

The treatment itself is safer. Besides, it can treat any parts of the body. Indications including acne scars, desalt and eliminate pigmentation, surgical scars, traumatic scars, burn scars, chloasma, Civatte poikiloderma, wrinkles, skin laxity, photoaging skin etc..

Technical Parameters:

Wavelengths: 10600nm

Max Power: 30W

Peak Power: 800W

Laser Output Modes: Continuous, Single Pulse, Repeat Pulse, Ultra Pulse

Aiming Beam: 5mW Diode

1. How do I know if I need CO2 laser? 

 

Anyone who has sun damaged, aging skin, irregularly pigmented skin, wrinkles, sagging, irregular texture of the skin or other skin condition that could be expected to be improved with this treatment that understands the risks, costs and time necessary to achieve the full benefit of the procedure and who has realistic expectations of the ultimate outcome.

 

2. What benefits can I expect? 

Results that are expected are a very significant and noticeable reduction in the components of sun damaged skin such as “age-spots” (also called sun freckles, liver spots, and lentigines), fine lines, wrinkles, scarring, uneven coloration, skin laxity, textural irregularities, dull tone, and a thinned collagen layer. The skin will continue to improve for a period of 6 months following the procedure provided proper skincare is used and sun exposure is minimized. Sometimes the results are not significant until the 6th and even the 9th month, depending on the person's age, their aftercare routine and their history of smoking

Brief Introduction

 

Refine super pulsed CO2 laser Refine is a classic minimally invasive laser equipment for dermatologic surgery. This latest super pulsed laser emission system delivers hundreds of orderly micron pulsed laser beam on skin lesions, for controllable and accurate treatment by means of adjusting the size, density, distance,nature of the multiple arrays, and the diameter and the depth of the pore.

 

The treatment of Refine is very safe and can cover any part of the body. Its applications include a variety of wrinkles(forehead lines,eyebrow lines,eye wrinkles,perioral wrinkles,neck lines,stretch marks etc.),sagging skin, drooping eyelids, eyes bags, acne(whelk) marks, all kinds of scar(trauma scar,burn scar,suture scar),stains etc.

  

3. Is there another way to get the same effect? 

 

Typically, there are no other treatments that can give you as much of an overall effect with only one treatment. You would have to combine the above with fillers or tissue tightening devices to achieve similar effects.

Fractional Co2 laser treatment:

Ultrapulse fractional co2 laser emits thousands of deep, tiny focal spot columns in your skin, called microscopic treatment zones. These lights penetrate into dermis skin, gasify the tissues around wrinkles and scars in an instant and make a signal of compounding collagen like tissues repair, collagen rearrangement ettc to regain a new fresh and healthy skin of youth.

Controls: Touch Screen

Display: Color LCD

Cooling: Water Closed Cycle Cooling System

Beam Delivery: 7 Joints Articulated Arm

Electrical: 230V 50Hz

Spot Diameter:  ≤0.2mm

Spot Spacing: 0.2-2mm

Pulse Duration: 100μm-10ms(Adjustable)

Fractional Co2 laser treatment:

Ultrapulse fractional co2 laser emits thousands of deep, tiny focal spot columns in your skin, called microscopic treatment zones. These lights penetrate into dermis skin, gasify the tissues around wrinkles and scars in an instant and make a signal of compounding collagen like tissues repair, collagen rearrangement ettc to regain a new fresh and healthy skin of youth.

Treatment Area: 20*20mm²

Out Put Frequency: 1-1000Hz

Scanner Weight: 0.7/1.5kg(Optional)

Scanner Size: 60*60*40mm

Power: 30W

Brief Introduction

 

Refine super pulsed CO2 laser Refine is a classic minimally invasive laser equipment for dermatologic surgery. This latest super pulsed laser emission system delivers hundreds of orderly micron pulsed laser beam on skin lesions, for controllable and accurate treatment by means of adjusting the size, density, distance,nature of the multiple arrays, and the diameter and the depth of the pore.

 

The treatment of Refine is very safe and can cover any part of the body. Its applications include a variety of wrinkles(forehead lines,eyebrow lines,eye wrinkles,perioral wrinkles,neck lines,stretch marks etc.),sagging skin, drooping eyelids, eyes bags, acne(whelk) marks, all kinds of scar(trauma scar,burn scar,suture scar),stains etc.

1. How do I know if I need CO2 laser? 

 

Anyone who has sun damaged, aging skin, irregularly pigmented skin, wrinkles, sagging, irregular texture of the skin or other skin condition that could be expected to be improved with this treatment that understands the risks, costs and time necessary to achieve the full benefit of the procedure and who has realistic expectations of the ultimate outcome.

 

2. What benefits can I expect? 

Results that are expected are a very significant and noticeable reduction in the components of sun damaged skin such as “age-spots” (also called sun freckles, liver spots, and lentigines), fine lines, wrinkles, scarring, uneven coloration, skin laxity, textural irregularities, dull tone, and a thinned collagen layer. The skin will continue to improve for a period of 6 months following the procedure provided proper skincare is used and sun exposure is minimized. Sometimes the results are not significant until the 6th and even the 9th month, depending on the person's age, their aftercare routine and their history of smoking

  

3. Is there another way to get the same effect? 

 

Typically, there are no other treatments that can give you as much of an overall effect with only one treatment. You would have to combine the above with fillers or tissue tightening devices to achieve similar effects.