1,The motor is high-efficiency and power-saving whose efficiency can achieve a primary energy consumption(IE4) standard.

2,The system adopts vector control technology, so the starting torque is higher, the dynamic response is faster and the overload ability is stronger.

3,In the case of the multi machine drive, it can achieve power balance automatically by the master-slave control.

4,Realize the real maintenance free by getting rid of the reducer,mechanical soft starting devices and other intermediate link.

5,The motor speed and other technical parameters can be designed separately according to the user needs.

Overview                                                                                                                                             

 Our Factory                                                                                                                                     

Specification model  explanation                                                                                                          

Application environment and other motor parameters explaination                                                     

Technical parameters                                                                                                                         

Remarks: 1: The above parameters are standard motor parameters; the parameters may change when the users usage occasion is different and you can view the specific parameters on the incidental performance parameters table of the permanent magnet motor.

                    2: When the motor rated speed is 60r/min or 90r/min,some of the motor performance parameters are shown like the above table

Product installation                                                                                                                             

Technical description

1,Using the expanding sleeve connect the motor and the devices.(using the rectangle spline for the 40kW,55kW)

2,The cooling mode of the motor is IC46W(water cooling) and we advise you to choose specialized explosion-proof water cooler of our company.

3,The installation size of the inlet and outlet hole is M27×2(internal thread).

4,The condition of the cooling water: water pressure range between 0.3 and 0.8MPa;the flow rate is higher than 2.8t/h.

5,There are oil hole before and after the outer bearing cover and please oiling in accordance with the specification requirements.

6,For the lubricating oil, we generally choose“the Great Wall 3# universal grease”.

Our Certificates