Product Details

Linbo Copper Factory

>> npt hose barb fitting

Product Description

Install Benefits:

The easiest & fastiest way to make plubing joint.Just push connect by hands,within 1 minutes to finish installation,Make our life more efficient,fast,save time& strength and your money.

Scope of Application:

It can be connected with PEX pipe;CPVC pipe;Copper pipe;PPR pipe;Pex-al-pex pipe;Galvanized pipe...any good quality pipe.

Applicable Specifications:

Imperical Size:1/2" 3/4" 1"

Metric Size:15mm 16mm 20mm 22mm 25 mm 32mm

Max pressure:600psi(42bar)
Max temperature:200°F(93°C)
Installation Operation Note

1.after pipe cutting,the end face must be flat and smooth,the out surface can not have burrs and deformation,to keep pipe surface clear and pluge into the connector directly,the pipe should be pushed to E position as shown in the picture to make sure seal.
2.the attached part(B) is special disassemblu clasp,to press the B on the pipe tie-in and pull the pipe when disassemble the pipe.
3.the part C is strenght ring for aluminum-plastic pipe.after pipe cutting and put the part C into the A end position to improve the sealing,the aluminum-plastic pipe must be equipped with strenght ring.

LINBO BRASS FITTINGS / TUBE SIZE COMPATIBILITY / PIPE INSERTION DEPTH
Nominal Size of Fitting	Nominal Size of Tubing	Tubing OD Size	Tubing ID Size	Pipe Insertion Decimal	Depth Fraction
1/4"	1/4" CTS	3/8"	0.305"	0.81"	13/16"
3/8"	3/8" CTS	1/2"	0.350"	0.94"	15/16"
1/2"	1/2" CTS	5/8"	0.475"	0.95"	15/16"
5/8"	5/8" CTS	3/4"	0.652"	1.13"	1-1/8"
3/4"	3/4" CTS	7/8"	0.671"	1.13"	1-1/8"
1"	1" CTS	1-1/8"	0.885"	1.32"	1-5/16"
1-1/4"	1-1/4" CTS	1-3/8"	1.055"	2.0"	2"
1-1/2"	1-1/2" CTS	1-5/8"	1.245"	2.25"	2-1/4"
2"	2" CTS	2-1/8"	1.629"	2.50"	2-1/2"
1/4" compression	1/4" ACR	1/4"	0.190"	n/a	n/a
3/8" compression	3/8" ACR	3/8"	0.311"	n/a	n/a

npt hose barb fitting Parts:

Buying Guides

Product Categories:
npt hose barb fitting : >" href="http://linbocopper.en.china.cn/productgrouplist-802432665/straight_connector.html" target="_blank">Straight Connector>> > " href="http://linbocopper.en.china.cn/productgrouplist-801268976/Push_Connect_Elbow.html" target="_blank">Elbow Connector>>> " href="http://linbocopper.en.china.cn/productgrouplist-801268976/Push_Connect_Elbow.html" target="_blank"> " href="http://linbocopper.en.china.cn/productgrouplist-801239565/Elbow_Drop.html" target="_blank">Wall Mount Elbow Connector> >" href="http://linbocopper.en.china.cn/productgrouplist-801239561/brass_tee_valve.html" target="_blank">Tee Connector>> >" href="http://linbocopper.en.china.cn/productgrouplist-801775141/Female_connector.html" target="_blank">Female Connector>> >" href="http://linbocopper.en.china.cn/productgrouplist-801807744/Male_connector.html" target="_blank">Male Connector>> >" href="http://linbocopper.en.china.cn/productgrouplist-801858844/End_cap.html" target="_blank">End Cap>>
Brass Valve: >" href="http://linbocopper.en.china.cn/productgrouplist-802319591/Brass_Ball_Valves.html" target="_blank"> Brass Ball Valve>> >" href="http://linbocopper.en.china.cn/productgrouplist-802322786/Brass_Gate_Valves.html" target="_blank"> Brass Gate Valve>> >" href="http://linbocopper.en.china.cn/productgrouplist-802374361/Brass_Angle_Valves.html" target="_blank"> Brass Angle Valve>> >" href="http://linbocopper.en.china.cn/productgrouplist-802361794/Safety_Valves.html" target="_blank">Brass Satety Valve>> >" href="http://linbocopper.en.china.cn/productgrouplist-802386170/Brass_Check_Valves.html" target="_blank">Brass Check Valve>> >" href="http://linbocopper.en.china.cn/productgrouplist-802376710/Brass_Tap_Bibcoke.html" target="_blank">Brass Tap/Bibcock>> >" href="http://linbocopper.en.china.cn/productgrouplist-802425535/radiator_valve.html" target="_blank"> Brass Radiator Valve>> >" href="http://linbocopper.en.china.cn/productgrouplist-802419274/Brass_Gas_Fitting.html" target="_blank"> Brass Gas Fitting>>
Other: Brass PEX Fitting Brass Copper Fitting Brass Manifold Brass Deep Valve Pitless Adapter Solar Water Constant Temperature Faucet Flexible Hose

Packaging & Shipping

Packaging Of npt hose barb fitting :

Inner packaging

For brass fitting ,we used nylon bags do inner packaging , Nylon bag can reduce oxidation occurred , To prevent rust And keep the brass luster.

Retail packaging

We put 50 or 100 pcs of brass ball valve in one carton box . Ensure that a sufficient quantity ,and protect goods in transfer.

Transfer packaging

For export we put goods in Moisture-proof packaging ,and put wooden box out side . Ensure that the product in transit in good condition.

custom packaging

We can According to your requirements for product packaging ,we can print your logo on carton or goods. to help your Smooth business.

Shipping Of npt hose barb fitting :

Sample shipping

For sample order we usually transfer by express,like FedEX UPS TNT and China EMS . usually you can get samples in one week . and if you need ,we can provide 1-3 pcs sampes by free.

Final order shipping

For final order . we can do air transfer and sea shipping . our factory are close to airport and seaport . usually transfer 1-5 ton goods to port cost 200 $ .

Production Process

Equipment for npt hose barb fitting :

Top quality and fast delivery require high automation equipment.Our production machine includes the following:

1.production equipment: forging, machining, polishing, plating and PVD

2.inspection equipment: spectrograph, chemical plating layer test, salt spray test, air and water pressure test, projection and various meters and gauges

Our Main Market Of npt hose barb fitting : North and South America,Europe,Austraila

FAQ

1.What is your MOQ ?

Usually our MOQ is2,000pcs. But we accept lower quantity for your tria order. Please feel free to tell us how many pieces you need, we will calculate the cost correspondingly, hoping you can place large orders after checking quality of our products and know our service.

2.How long is the sample lead time?

For existing samples, it takes 2-3 days. They are free. If you want your own designs, it takes 7-10 days, subject to your designs whether they need new MOLD, etc. Anyway, we will response fast to yourequest

3.How long is the production lead time

It takes 30 days for MOQ. We have large production capacity, which can ensure fast delivery time even for bulk

4.What format of the file do you need if I want my own design?

We have our own designer in house . So you can provide JPG, AI,cdr or PDF, etc.We will make drawing for mold or printing screen for your final confirmation based on technique.

5.What is your payment term?

Our payment term is TT 30% deposite after order signed and 70% against copy of T/T.paypel,western &union .