Barrier-free Lifting Platform electric platform outdoor wheelchair lift
Barrier-free Lifting Platform / Wheelchair Elevator Lift
Platform size: 1550mm *1080mm
Maximum Load Capacity: 250KG
Barrier-free Lifting Platform Specifications
Platform size: 1550 *1080mm
Overall Dimensions: 2000*1080*900mm
Maximum Lifting Height: 1000mm
Minimum Height of Lifting Bottom-plate: 90mm
Entry & Exit Mode: 90°or 180°
Lifting Speed: 60mm/s
Maximum Load Capacity: 250KG
Control Source: 24V/DC
Motor Power: 0.8KW, 24V/DC or 1.5KW, 220V/AC
Battery Supply: 24V/DC, 30A/H secondary battery (for DC only)
Power Supply: 220V/50HZ/25A
Drive System: Hydraulic driven
Running Mode: Jogging Control or automatic control
Installation Mode: Non-base pit installation, directly fixed on the concrete ground
Installation Mode: Non-pin installation
Extrocontrol Device: The external calling box should be separately installed in the neighboring wall of the above/below stopping floor of the equipment. Besides, remote controller could also be selected.
Emergency Stop:The machine shall be controlled by pressing the emergency button.
Manual Operation: The lifting bottom-plate shall manually descend when the manual hydraulic valve is open
Safety Device
Safety Interlocking: The lifting platform shall not run if operates improperly.
Safety Edge:The operation must Be stopped immediately the safety edge meets obstacles during operation.
Emergency Descending: When there is no power or malfunctions, manually descend the device
Safety Wane: The front/back wane shall upwarp during lifting process
Safety Handrail: Acts as safety role during lifting/descending process
Safety Cordion Dust Cap: Prevent foreign bodies from entering into the machine
