Barrier-free Lifting Platform electric platform outdoor wheelchair lift

Barrier-free Lifting Platform /  Wheelchair Elevator Lift

Platform size: 1550mm *1080mm

Maximum Load Capacity: 250KG

Barrier-free Lifting Platform Specifications

Platform size: 1550 *1080mm

Overall Dimensions: 2000*1080*900mm

Maximum Lifting Height: 1000mm

Minimum Height of Lifting Bottom-plate: 90mm

Entry & Exit Mode: 90°or 180°

Lifting Speed: 60mm/s

Maximum Load Capacity: 250KG

Control Source: 24V/DC

Motor Power: 0.8KW, 24V/DC or 1.5KW, 220V/AC

Battery Supply: 24V/DC, 30A/H secondary battery (for DC only)

Power Supply: 220V/50HZ/25A

Drive System: Hydraulic driven

Running Mode: Jogging Control or automatic control

Installation Mode: Non-base pit installation, directly fixed on the concrete ground

Installation Mode: Non-pin installation

Extrocontrol Device: The external calling box should be separately installed in the neighboring wall of the above/below stopping floor of the equipment. Besides, remote controller could also be selected.

Emergency Stop:The machine shall be controlled by pressing the emergency button.

Manual Operation: The lifting bottom-plate shall manually descend when the manual hydraulic valve is open

Safety Device

Safety Interlocking: The lifting platform shall not run if operates improperly.

Safety Edge:The operation must Be stopped immediately the safety edge meets obstacles during operation.

Emergency Descending: When there is no power or malfunctions, manually descend the device

Safety Wane: The front/back wane shall upwarp during lifting process

Safety Handrail: Acts as safety role during lifting/descending process

Safety Cordion Dust Cap: Prevent foreign bodies from entering into the machine