SiC Heating Elements for Metallurgy Industry up to 1600C
SiC Heating Elements GD Type are made from high-density, high-purity silicon carbide, which is the most popular type of economical heating element capable of operating under hot and rigorous environments.
SiC Heating Elements GD Type Features:
1. Withstands as high as 1600°C (surface temperature).
2. Generates high heat output per unit surface area, approximately 5-10 times than
the output of Nichrome wire.
3. High strength and excellent shock resistance.
4. Heat source is free of noise and air pollution.
SiC Heating Elements GD Type Specifications:
When you place an order of the Rod type silicon carbide heating elements, please give following information:
OD: Outer Diameter;
HZ: Length of Hot Zone;
CZ: Length of Cold Zone;
OL: total Length;
Order Sample of the Rod type silicon carbide heating elements
ED(Rod)Shape: OD=54mm,HZ=1575mm,CZ=419mm OL=2413mm ,Resistance :0.9
Please Specify As: 54/1575/2413/0.90
SiC Heating Elements GD Type Parameters:
OD (Diameter) | HZ (Hot Zone) | CZ (Cold Zone) | OL (Total Length) | Resistance |
8mm | 100-300mm | 60-200mm | 240-700mm | 2.1-8.6 ohms |
12mm | 100-400mm | 100-350mm | 300-1100mm | 0.8-5.8 ohms |
14mm | 100-500mm | 150-350mm | 400-1200 | 0.7-5.6ohms |
16mm | 200-600mm | 200-350mm | 600-1300 | 0.7-4.4 ohms |
18mm | 200-800mm | 200-400mm | 600-1600 | 0.7-5.8 ohms |
20mm | 200-800mm | 250-600mm | 700-2000mm | 0.6-6.0 ohms |
25mm | 200-1200mm | 250-700mm | 700-2600mm | 0.4-5.0 ohms |
30mm | 300-2000mm | 250-800mm | 800-3600mm | 0.4-4.0 ohms |
35mm | 400-2000mm | 250-800mm | 900-3600mm | 0.5-3.6 ohms |
40mm | 500-2700mm | 250-800mm | 1000-4300mm | 0.5-3.4 ohms |
45mm | 500-3000mm | 250-750mm | 1000-4500mm | 0.3-3.0 ohms |
50mm | 600-2500mm | 300-750mm | 1200-4000mm | 0.3-2.5 ohms |
54mm | 600-2500mm | 300-750mm | 1200-4000mm | 0.3-3.0 ohms |