Corrosion and Wear Resistance 99.5%/99.7% Alumina Ceramic Rod
USD $0.32 - $5.67 /Piece
Min.Order:10 Pieces
High Wear Resistance Alumina Ceramic Rod
Alumina ceramics with superior strength, hardness, insulation, thermal conductivity, high temperature, oxidation resistance, corrosion, corrosion resistance, abrasion resistance, high temperature strength and other characteristics, it has been widely used in engineering mechanical seals, electronics, instrumentation, sensing, transport, communications and other occcasion.
The content of 99.7%, 99%, 95% alumina products contains the crucible, sockets, valves, electrodes spools, wear board, alumina balls, electronic porcelain, textile porcelain pieces, and other shaped pieces.
Alumina Ceramic Rods Features
1) A variety of specifications available.
2) Satisfy various technical request
3) Lower medium spoilage
4) Good insulation performance and high temperature resistance
5) Stiffness texture
6) Used in all electric products and electric heating products
Alumina Rod Main Performance Index
Performance Index | 99.7 Alumina | 95 Alumina | 85Alumina |
Al2O3 (%) | 99.7 | 95 | 85 |
SiO2 (%) | <0.1 | — | — |
Density (g/cm3) | 3.95 | 3.88 | 3.2 |
Water Absorption (%) | 0 | 0.01 | 0.2 |
Cld Compressive Strength (MPa) | 450 | 350 | 200 |
20C Leak Rates (Torr/L.sec) | <10-11 | <10-11 | <0-11 |
Twisting In High Temperature (mm) | 1700C 0.2 allowance | 1600C 0.2 allowance | 1400C 0.2 allowance |
Bonding In High Temperature | 1700C non-caked | 1600C non-caked | 1400C non-caked |
20—1000C Coefficient of Thermal Expansion (mm.10-6/C m) | 8.6 | 8.2 | 8.2 |
Thermal Conductivity (W/m.k) | 25 | 25 | 25 |
Electric Insulation Strength (KV/mm) | 20 | 20 | 15 |
20C Direct Current Insulating Resistance (Ohm/cm) | 1014 | 1014 | 1014 |
High-Temperature(1000C MΩ) Insulation Resistance (1300C MΩ_ | ≥0.08 | ≥0.08 | ≥0.08 |
≥0.02 | ≥0.02 | ≥0.02 | |
Thermal Shock Resistance | 1550C 6 times not cracked | 1550C 6 times not cracked | 1300C 3 times not cracked |
Max. Temperature (C) | 1900 | 1800 | 1400 |
Application
Alumina ceramic tube is mainly applied to wear, serious scour of material handling occasions, such as coal-fired power generation, metallurgy, coal, mining, industry, and other geological materials pipeline, as well as the use of electronic appliances such as insulation pipe; alumina ceramic rods is widely used in the industry of resistance to temperature and thermostat, as a resistance ceramic matrix and two-metal thermostat used in ceramic-top column.
Notice
1. Alumina products are fragile. Please handle them carefully and avoid collision during unpacking, transportation, handling and cleaning
2. Check whether any micro-cracks exist before using alumina products. Products with micro-cracks should not be used.
3. Alumina products should be completely dry before usage. If they get wet, let the crucible or tube dry naturally before using them. If dry crucibles by placing in a dryer or oven, make sure that the dry process goes slowly.
4. Do not load too many materials in Alumina Tubes, which can increase the possibility of uneven heating.
Located in Henan province, Henan JK Group is one of most professional manufacturers of Alumina Ceramic Products, including alumina boat, alumina crucible, alumina tube and other alumina ceramic products.They are widely used in used in engineering, mechanical seals, electronics, instrumentation, sensing, transport, communications, and other occasions or areas.
Relied on good reputation, excellent technology and product quality, we have been well received since our products were brought to the market.In 2010, our company was honored to be preferred supplier by the local fire control organ.
1. Your inquiry related to our products or prices will be replied within 24hours
2. Guarantee samples quality same as mass production quality
3. All our products have 2-years warranties.
4. Offering the support to solve the problem in the application or selling period.
5. Competitive prices based on same quality
1.Are you a manufacturer or trading company ?
We are professional manufacturer in China ,and have in this line for almost 10 years. Also we operate other insulation refractory materials,like glass fiber and asbestos fiber products.
2.Would it be possible for us to visit your factory
Sure, we welcome you at any time! Seeing is believing.
3.Will your company supply samples?
Yes,we do.The sample expense will be deducted from the value of your order.
4.Which payment terms are you accept?
T/T, L/C, Western Union, Money Gram, Paypal are available for us.