Models

HV-1000DT (Approved by CE certificate, ensure the safety operation of the machine. Certificate No.: GB/1067/3980/12 Issue 1)

 Testing Force

10g (0.098N),25g (0.245N),50g (0.49N),100g (0.98N ),200g (1.96N),300g (2.94N),500g (4.9N),1000g(9.8N)

 Scale

HV0.01,HV0.025,HV0.05,HV0.1,HV0.2,HV0.3,HV0.5,HV1,HV2

 Min. Measuring Unit

0.25μm

 Hardness Value Range

1HV-4000HV

 Hardness Value of Reading

Digital LCD Screen

 Total Magnification of  Microscope

100X(For Observation),400X(For Measurement)

(Can be extended to 200X or 600X)

 Loading Method

Automatically(Load, dwell and unload the testing force)

Duration Time

1-99s

Switch Type of Objective lens and Indenter

Manual Turret

Specimen Allowing Maximum Height

85mm

Distance from Indenter Center to Fuselage

120mm

Overall Dimension

490×185×515mm(L×W×H)

Net Weight

45kg

Light Source

LED Cold light source (can be continuous use for 24 hours, no heat generated, servicing life can reach 100,000 hours)

Power Supply

110V/220V + 5%, 50/60 Hz

X-Y Testing Table

Dim.:100×100 mm, Max. Travel Range: 25×25mm, Moving Resolution Ratio:0.01mm

(X-Y Digital Testing Table with digital LCD Screen for Optional)

Data Output

Built-in Printer(Hardness Value, The Max. And Min. Value, Testing times and Average Value)

Built-in RS-232 interface

Executed Standard

GB/T4340.2 Chinese Standard, JJG151 Inspection Rules

Standard Accessories

1 piece: 10X micrometer eyepiece; 10X and 40X objective lens; Vickers indenter; X-Y Testing Table; Flat Fixture; Small Parts Fixture; Water level; Power line; Dust cover; Instruction Book; Hardness Conversion Tables; Certificate of quality; Warranty Card; Accessory case 2 pieces: Standard block of hardness 4 pieces: horizontal adjusting screw

Optional Purchase Accessories

Image analysis software; Metallographic structure equipment; Noop Indentor; Knoop hardness block; 15X micrometer eyepiece; 2.5X Objective lens; 20X Objective lens; 60X Objective lens