Specifications
professional mannuacturer of making plastic injection molding machine, from 68ton to 1680tongood quality, good stability
parameters of preform injection molding machine
INJECTION UNIT | item | unit | LSF208 | ||
A | B | C | |||
screw diameter | mm | 38 | 42 | 45 | |
screw L/D ratio | L/D | 23.6 | 21.4 | 20 | |
theoretical shot size | cm3 | 221 | 270 | 310 | |
injection weight | g | 201 | 246 | 282 | |
Injection rate | g/s | 105 | 132 | 151 | |
Plasticizing capacity | g/s | 16 | 20 | 24 | |
Injection pressure | Mpa | 235 | 190 | 167 | |
Screw speed | rpm | 0-200 | |||
CLAMPING UNIT | Clamp force | KN | 1480 | ||
Space between tie bars | mm | 410*410 | |||
Toggle stroke | mm | 380 | |||
Max. mold height | mm | 460 | |||
Min. mold height | mm | 150 | |||
Ejector stroke | mm | 130 | |||
Ejector tonnage | KN | 39.6 | |||
Ejector number | p | 5 | |||
OTHERS | Max.pump pressure | Mpa | 16 | ||
Pump motor power | KW | 13 | |||
Heater power | KW | 7.6 | |||
Machine dimension | m | 4.5*1.33*1.85 | |||
Machine weight | t | 4.7 | |||
