plastic container injection moulding machine
USD $46,000 - $46,000 /Set
Min.Order:1 Set
Changzhou Longsheng Machinery Co., Ltd.
1. Horizontal Injection Molding Machine Features:
1. Screw of big length to diameter ratio, uniform plastication and high plasticizing capability.
2. Multi step adjustment of injection speed or pressure.
3. Back pressure control of molten plastic.
4. Double toggle mold closing system with a large force magnification ratio and a large stroke ratio.
5. Very good speed characteristic of high speed mold closing and low pressure mold protection.
6. Various kinds of hydraulic ejectors.
7. Double proportional, load sensitive hydraulic circuit.
8. For big sizes of machines there are several oil pumps in a group, use proportional valve to compensate the difference of pressure or flow between pumps.
9. Triple interlock of mechanic, electric and hydraulic devices.
10. Hydraulic knockout core device and rotary mold-parting from the work piece device.
11. Using the computer, electric and hydraulic elements of famous brands in the world.
TECHNICAL PARAMETER---LSF398
INJECTION UNIT |
| Unit | LSF-398 | ||
A | B | C | |||
Screw Diameter | Mm | 70 | 75 | 80 | |
Screw L/D Ratio | L/D | 21.4 | 20 | 18.8 | |
Short Size | Cm3 | 1385 | 1590 | 1809 | |
Injection weight | G | 1260 | 1447 | 1646 | |
Injection Rate | g/s | 310 | 356 | 405 | |
Plasticizing capacity | g/s | 60 | 65 | 70 | |
Injection Pressure | Mpa | 195 | 158 | 139 | |
Screw Speed | Rpm | 0-165 | |||
CLAMPING UNIT | Clamp Force | KN | 3980 | ||
Space Between Tie Bars | mm | 720*720 | |||
Toggle Stroke | mm | 700 | |||
Max. Mold Height | mm | 760 | |||
Min. Mold Height | mm | 280 | |||
Ejector Stroke | mm | 200 | |||
Ejector Tonnage | KN | 110 | |||
Ejector Number | P | 13 | |||
OTHERS | Max. pump Pressure | Mpa | 16 | ||
Pump motor powder | Kw | 37 | |||
Heater Power | Kw | 24.8 | |||
Machine Dimension(L*W*H) | M | 7.3*2.0*2.2 | |||
Oil Tank Capacity | L | 850 | |||
Machine Weight | T | 16 |