Specifications

1-The machine is used for filter rubber
2-Model:XJL-115,XJL-150,XJL-200,XJL-250
3-machine head adopt pneumatic control

Good quality with reasonable price. Easy operation with convenient maintenance. Low labor intensity and low energy consumption.

 

Rubber strainer extruding machine

1.The use introduction

The machine is used for filter rubber .

2. Main technical parameter

Model Item			XJL-115	XJL-150	XJL-200	XJL-250
Screw dia		mm	115	150	200	250
L/D ratio			4.8	5.2	5	4.8
Screw speed		r/min	40	42.5	44	40
Cutting equipment speed		r/min	15	17	16	6
Motor power		kW	22	45	75	110
Steam pressure		MPa	0.6-0.8	0.6-0.8	0.6-0.8	0.6-0.8
Cooling water pressure		MPa	0.2	0.2	0.2	0.2
Capacity		kg/h	100~280	400	800	1200
Overall dimensions	L	mm	2770	3600	4229	4220
	W	mm	655	820	2120	1400
	H	mm	1350	1500	1493	1528
About weight		t	3.5	~4.5	~8	~9

Above is our standard technical parameter. We can also manufacture NON-STANDARD products according to customers' specific request.

3.Structure introduction

The machine is composed of head, frame, pedestal, pipeline, lubricating system and electrical control system.

Screw is made of 38CrMoALA, the reducer transfers drive through the motor, and screw speed can’t be adjusted. In order to heating or cooling screw, screw is hollow, add steam or cooling water through the rotated joint. Screw is a dicephalous isometry screw thread, and screw thread is wearable owing to the surface of screw thread is heating nitrous treatment. Screw works when the frame is in pressure, and the axial drive is supported by thrust roller axletree in thrust axletree bedplate .

Our motto: The honesty is the root, a promise is a promise.