Specifications

1. Rubber cutting machine is used to cut the rubber into pieces
2. Simple structure, easy operation
3. Passed ISO9001

Good quality with reasonable price. Easy operation with convenient maintenance. Low labor intensity and low energy consumption.

 

OIL-HYDRAULIC RUBBER BALE CUTTER
The cutting machine is used to cut evenly heated natural rubber stock or rubber bale.

This rubber cutting machine/cutter/bale splitter is mainly used to cut the natural rubber, synthetic rubber, and other plastic materials into gommures/pieces,which is convenient to mix;especially it is suitable to be installed near the rubber mixer to cut small piece of rubber.

 

 

Type	XQL-80	XQL-160
Motor power (kw)	5.5	5.5
Fixed cut-off strength	80 KN	160 KN
Work flowing tubing head pressure (Mpa)	8	12
Bale splitter width(mm)	660	1000
Bale splitter starveling schedule (mm)	680	680
Weight (kg)	1200	1500
Overall dimension (mm)	2000*1000*2500	2000*1200*2500

 

Above is our standard technical parameter. We can also manufacture NON-STANDARD products according to customer's specific requests.

 

1. This bale cutter is mainly used to cut the natural rubber, synthetic rubber, and other plastics materials, especially it is suitable to be installed near the rubber mixer to cut small piece of rubber.

2. This bale cutter mainly consists of rubber knife, frame, cylinder, base, auxiliary table, hydraulic system, and electric system. The lead is casted on the base under the rubber knife for protecting the edge of the rubber knife. Simple structure,convenient to operate.

3. When cutting the raw rubber, put the raw rubber under the rubber knife, then press the start button, the knife can cut the rubber.

4. Two limit switches are installed on the frame to control the reversal valve to change the movement direction of the rubber knife, at the same time it protects the cover of the cylinder.

 

 

Our motto: The honesty is the root, a promise is a promise.