Specifications

used to splite natural rubber and synthetic rubber into pieces rubber for plasticating

vertical rubber cutter:

 

1.Mainly uses 

 

The bale cutter is mainly used to cut natural rubber, synthetic rubber, and other plastics materials, especially it is suitable to be installed near the rubber mixer to cut small pieces of rubber.  The cutter is matched with working track, which makes rubber feeding much more convenient.

 

 

 

2.structure

 

This bale cutter mainly consists of rubber knife, frame, cylinder, base, auxiliary table, hydraulic system, and electric system. The lead is casted on the base under the rubber knife for protecting the edge of the rubber knife.  When cutting the raw rubber, put the raw rubber under the rubber knife, then press the start button, the knife can cut the rubber.  Two limit switches are installed on the frame to control the reversal valve to change the movement direction of the rubber knife, at the same time it protects the cover of the cylinder.

 

 

 

3.Characteristics:  

1. low noise.

 

 2. constant temperature  3. automatic pressure mataining and pressure supplement.

 

 4.It has solid construction, reasonable design, high production efficiency, easy operation.

 

 5. Cutting knife is controlled by hydraulic system, and reciprocating motion.

 

 6.CE standard ISO9001 certified.

 

Type	XQL-80	XQL-160
Motor power (kw)	5.5	5.5
Fixed cut-off strength	80 KN	160 KN
Work flowing tubing head pressure (Mpa)	8	12
Bale splitter width(mm)	660	1000
Bale splitter starveling schedule (mm)	680	680
Weight (kg)	1200	1500
Overall dimension (mm)	2000*1000*2500	2000*1200*2500
Note: 1. The cutting knife is Alloy cold hard cast-iron. 2. The motor made in Qingdao China. 3. Onepush operation, so easy. 4. The price's validity for 20 days 5. Warranty: 1 year