Hot sales high performance rare earth magnetic separator
USD $4,000 - $9,999 /Set
Min.Order:1 Set
Shanghai Shibang Machinery Co., Ltd.
rare earth magnetic separator Introduction
The rare earth magnetic separator raw materials with different magnetic rigidities. It works under the magnetic force and machine force. rare earth magnetic separator are designed to recover ferromagnetic materials. They are available in designs and sizes to provide solutions for all applications. The heart of each separator is the magnetic system with its unique design, which has a proven record of high efficiency. The rare earth magnetic separator are available in cyclic design with process vessel diameters smaller than 3mm.
Working principle of rare earth magnetic separator
The rare earth magnetic separator is mainly composed of cylinder, magneti system, trough and transmission part.After the ore slurry running into the trough through ore box an effected by the feeding ore water pipe, the ore particles can enter into the ore feeding area in trough. The magnetic ore particles can form ‘magnet group’ or ‘magnet chain’ by magnetic field’s affect. All the ‘magnet group’ or ‘magnet chain’ moves to magnetic poles because of magnetic force in the ore slurry and then they can be attached to the cylinder. Since the polarity of magnetic poles are arrayed alternately and fixed tightly when working, when ‘magnet group’ or ‘magnet chain’ turning with the cylinder, the non magnetic materials, such as matrix which are mixed with ‘magnet group’ or ‘magnet chain’ will drop down during the rolling process. Eventually, the ‘magnet group’ or ‘magnet chain’ attached to the cylinder surface are fine ore. When the fine ore turn to the weakest place of magnetic system in the cylinder, it will be pushed to the fine ore trough by the water coming from unloadore pipe. Non magnetic or weak magnetic ore are left in the ore slurry and then discharged out of the trough, these ore are the gangue. Some magnetic ore can be recycled by putting the gangue in rare earth magnetic separator again and then the recycle rate can be increased much. The fine ore can pass through the rare earth magnetic separator again and the matrix which mixing with the fine ore can be wiped out to upgrade the purity of fine ore.
rare earth magnetic separator features
1). Large angle of magnetic system
2). High BR and high HCB magnetic material
3). High magnet intensity with less than 5% demagnetization
4). Magnet blocks loosing down protection
5). Perfect waterproof ability for the drum
The production line of rare earth magnetic separator
rare earth magnetic separator application
rare earth magnetic separator is one kind of efficient equipment for processing fine, feebly magnetic minerals, such as hematite, limonite, wolfram, limonite, and tantalum—niobium, etc. In recent years, it is also more and more applied in purifying quartz, feldspar and nephrite. Its magnetic system is a ring-shape chain closed magnetic circuit with energizing coils made of copper tube and cooled internally by water. Grooved plates made of magnetic conductive stainless steel are used as magnetic matrix.
Standard of rare earth magnetic separator :
Model | Roller size | Magnetic intensity on surface mT | Processing ability | Drive power | Roller rotary speed | Weight | |||
(Dia.xLength) | |||||||||
mm | Geometric center | average | highest | T/h | m3/h | Kw | Kg | ||
CTS(N,B)-46 | 400x600 | 130 | 160 | 1~3 | 5 | 1.1 | 45 | 600 | |
CTS(N,B)-66 | 600x600 | 145 | 170 | 5~10 | 16 | 1.1 | 40 | 750 | |
CTS(N,B)-69 | 600x900 | 145 | 170 | 8~15 | 24 | 1.1 | 40 | 830 | |
CTS(N,B)-612 | 600x1200 | 145 | 170 | 10~20 | 32 | 2.2 | 40 | 990 | |
CTS(N,B)-618 | 600x1800 | 145 | 170 | 15~30 | 48 | 2.2 | 40 | 1330 | |
CTS(N,B)-712 | 750x1200 | 120 | 155 | 180 | 15~30 | 48 | 3 | 35 | 1500 |
CTS(N,B)-718 | 750x1800 | 120 | 155 | 180 | 20~45 | 72 | 3 | 35 | 2100 |
CTS(N,B)-918 | 900x1800 | 148 | 165 | 190 | 25~55 | 90 | 4 | 28 | 2900 |
CTS(N,B)-924 | 900x2400 | 148 | 165 | 190 | 35~70 | 110 | 4 | 28 | 3500 |
CTS(N,B)-1018 | 1050x1800 | 148 | 165 | 190 | 40~75 | 120 | 5.5 | 22 | 4000 |
CTS(N,B)-1021 | 1050x2100 | 148 | 165 | 190 | 45~88 | 140 | 5.5 | 22 | 4500 |
CTS(N,B)-1021 | 1050x2100 | 160 | 240 | 280 | 45~88 | 140 | 5.5 | 22 | 4500 |
CTS(N,B)-1024 | 1050x2400 | 148 | 165 | 190 | 52~100 | 160 | 5.5 | 22 | 5000 |
CTS(N,B)-1024 | 1050x2400 | 160 | 240 | 280 | 52~100 | 160 | 5.5 | 22 | 5000 |
CTS(N,B)-1030 | 1050x3000 | 160 | 240 | 280 | 65~125 | 200 | 7.5 | 22 | 6200 |
CTS(N,B)-1218 | 1200x1800 | 148 | 165 | 190 | 47~90 | 140 | 5.5 | 19 | 5800 |
CTS(N,B)-1218 | 1200x1800 | 160 | 240 | 280 | 47~90 | 140 | 5.5 | 19 | 5800 |
CTS(N,B)-1224 | 1200x2400 | 148 | 165 | 190 | 82~120 | 192 | 7.5 | 19 | 6200 |
CTS(N,B)-1224 | 1200x2400 | 160 | 240 | 300 | 82~120 | 192 | 7.5 | 19 | 6200 |
CTS(N,B)-1230 | 1200x3000 | 148 | 165 | 190 | 80~150 | 240 | 7.5 | 19 | 7200 |
CTS(N,B)-1230 | 1200x3000 | 160 | 240 | 280 | 80~150 | 240 | 7.5 | 19 | 7200 |
CTS(N,B)-1530 | 1500x3000 | 180 | 240 | 300 | 90~170 | 270 | 11 | 14 | 8100 |
CTS(N,B)-1540 | 1500x4000 | 180 | 240 | 300 | 115~220 | 350 | 11 | 14 | 9300 |
SHANGHAI SHIBANG MACHINERY CO., LTD is one high-tech enterprise, which involves R&D, production, sales and service as well. In the past 20 years, we devote to producing mining equipments, sand making machines and industrial grinding mills, offering expressway, rail way and water conservancy projects the solution of making high grade sand and matched equipments.
The head office of SBM is in Shanghai- the international financial centre. Here we have modern production base of 2.3 million square meters, professional R&D institution and technology team, which make us world-class company. Here all SBM machines are designed produced, assembled and texted according to the ISO9001:2008.
Till now, our products are sold to 130 countries, being the popular equipments in global crushing and grinding industry. With the development of our SBM, we would like to help more and more customers start their business in mining and construction industries, offer them the best solution, much more advanced machinery and better service.
1. We are Manufacturer (Not Dealer):
All machineries from SHANGHAI SHIBANG MACHINERY CO., LTD are made by ourselves, with lower price, good quality and assured full after service.
2. Training & Service:
1.We provide you with the prophase plan, process flow design and manufacture equipment according to your special demand.
2.Send technicians to the jobsite for guiding the installation and adjustment, training operators and finishing the check and accept together with you.
3.We always keep certain inventory level of spare parts, which means the replacements can be shipped to you right away.
3. If you are new for this business:
Many thanks for your trust; we can provide you with design scheme for complete production lines, spot inspection and operator training according to your demands and the conditions of applied spot, we can help you choose the right equipments.
4. We’d like to recommend a suitable model for you and send you a best quotation. So please give us some more information about your requirement in your enquiry.
♥ What is the type and size of raw material?
♥ What is your required capacity(t/h)?