Hot sales high efficient separator for chromite price for sale

separator for chromite Introduction:

The separator for chromite is generally a low cost method of recovery, unless high intensity separators are required. The electro-magnetic high intensity separators that produce 20,000 gauss; the rare earth separator for chromite is relatively inexpensive and can produce magnetic fields around 6,000 gauss. To different kinds of mineral ores, the application of separator for chromite is quite different.

Working principle of separator for chromite

The separator for chromite is mainly composed of cylinder, magneti system, trough and transmission part.After the ore slurry running into the trough through ore box an effected by the feeding ore water pipe, the ore particles can enter into the ore feeding area in trough. The magnetic ore particles can form ‘magnet group’ or ‘magnet chain’ by magnetic field’s affect. All the ‘magnet group’ or ‘magnet chain’ moves to magnetic poles because of magnetic force in the ore slurry and then they can be attached to the cylinder. Since the polarity of magnetic poles are arrayed alternately and fixed tightly when working, when ‘magnet group’ or ‘magnet chain’ turning with the cylinder, the non magnetic materials, such as matrix which are mixed with ‘magnet group’ or ‘magnet chain’ will drop down during the rolling process. Eventually, the ‘magnet group’ or ‘magnet chain’ attached to the cylinder surface are fine ore. When the fine ore turn to the weakest place of magnetic system in the cylinder, it will be pushed to the fine ore trough by the water coming from unloadore pipe. Non magnetic or weak magnetic ore are left in the ore slurry and then discharged out of the trough, these ore are the gangue. Some magnetic ore can be recycled by putting the gangue in separator for chromite again and then the recycle rate can be increased much. The fine ore can pass through the separator for chromite again and the matrix which mixing with the fine ore can be wiped out to upgrade the purity of fine ore.

separator for chromite features

 1.High intensity. High garden, high power rare earth magnets

2.Available with flanges to suit square and round chutes

3.Available with angle deflectors above and between the tubes for heavy contamination

4.Direct access to magnets in chute

5.Easily installed and extremely easy to clean

The production line of  separator for chromite

separator for chromite application

separator for chromite is suitable for the wet magnetic separation of the materials whose granularity is below 3mm such as magnetite, pyrrhotite, calcined ore and ilmenite and can also be used for emoving iron from the materials such as coal, nonmetal ore and building material. separator for chromite can be divided into three types according to trough’s different structure; they are downstream type, semi-reflux type and reflux-type.

Standard of separator for chromite :