Product Details

Product Description

hematite iron ore separator Introduction

The hematite iron ore separator is generally a low cost method of recovery, unless high intensity separators are required. The electro-magnetic high intensity separators that produce 20,000 gauss; the rare earth hematite iron ore separator is relatively inexpensive and can produce magnetic fields around 6,000 gauss. To different kinds of mineral ores, the application of hematite iron ore separator is quite different.

Working principle of hematite iron ore separator

The hematite iron ore separator is mainly composed of cylinder, magneti system, trough and transmission part.After the ore slurry running into the trough through ore box an effected by the feeding ore water pipe, the ore particles can enter into the ore feeding area in trough. The magnetic ore particles can form ‘magnet group’ or ‘magnet chain’ by magnetic field’s affect. All the ‘magnet group’ or ‘magnet chain’ moves to magnetic poles because of magnetic force in the ore slurry and then they can be attached to the cylinder. Since the polarity of magnetic poles are arrayed alternately and fixed tightly when working, when ‘magnet group’ or ‘magnet chain’ turning with the cylinder, the non magnetic materials, such as matrix which are mixed with ‘magnet group’ or ‘magnet chain’ will drop down during the rolling process. Eventually, the ‘magnet group’ or ‘magnet chain’ attached to the cylinder surface are fine ore. When the fine ore turn to the weakest place of magnetic system in the cylinder, it will be pushed to the fine ore trough by the water coming from unloadore pipe. Non magnetic or weak magnetic ore are left in the ore slurry and then discharged out of the trough, these ore are the gangue. Some magnetic ore can be recycled by putting the gangue in hematite iron ore separator again and then the recycle rate can be increased much. The fine ore can pass through the hematite iron ore separator again and the matrix which mixing with the fine ore can be wiped out to upgrade the purity of fine ore.

hematite iron ore separator features

1.High intensity. High garden, high power rare earth magnets

2.Available with flanges to suit square and round chutes

3.Available with angle deflectors above and between the tubes for heavy contamination

4.Direct access to magnets in chute

5.Easily installed and extremely easy to clean

The production line of hematite iron ore separator

hematite iron ore separator application

hematite iron ore separator is suitable for the wet magnetic separation of the materials whose granularity is below 3mm such as magnetite, pyrrhotite, calcined ore and ilmenite and can also be used for emoving iron from the materials such as coal, nonmetal ore and building material. hematite iron ore separator can be divided into three types according to trough’s different structure; they are downstream type, semi-reflux type and reflux-type.

Standard of hematite iron ore separator :

Model	Roller size	Magnetic intensity on surface mT			Processing ability		Drive power	Roller rotary speed	Weight
	(Dia.xLength)	Magnetic intensity on surface mT			Processing ability		Drive power		Weight
	mm	Geometric center	average	highest	T/h	m3/h	Kw		Kg
CTS(N,B)-46	400x600		130	160	1~3	5	1.1	45	600
CTS(N,B)-66	600x600		145	170	5~10	16	1.1	40	750
CTS(N,B)-69	600x900		145	170	8~15	24	1.1	40	830
CTS(N,B)-612	600x1200		145	170	10~20	32	2.2	40	990
CTS(N,B)-618	600x1800		145	170	15~30	48	2.2	40	1330
CTS(N,B)-712	750x1200	120	155	180	15~30	48	3	35	1500
CTS(N,B)-718	750x1800	120	155	180	20~45	72	3	35	2100
CTS(N,B)-918	900x1800	148	165	190	25~55	90	4	28	2900
CTS(N,B)-924	900x2400	148	165	190	35~70	110	4	28	3500
CTS(N,B)-1018	1050x1800	148	165	190	40~75	120	5.5	22	4000
CTS(N,B)-1021	1050x2100	148	165	190	45~88	140	5.5	22	4500
CTS(N,B)-1021	1050x2100	160	240	280	45~88	140	5.5	22	4500
CTS(N,B)-1024	1050x2400	148	165	190	52~100	160	5.5	22	5000
CTS(N,B)-1024	1050x2400	160	240	280	52~100	160	5.5	22	5000
CTS(N,B)-1030	1050x3000	160	240	280	65~125	200	7.5	22	6200
CTS(N,B)-1218	1200x1800	148	165	190	47~90	140	5.5	19	5800
CTS(N,B)-1218	1200x1800	160	240	280	47~90	140	5.5	19	5800
CTS(N,B)-1224	1200x2400	148	165	190	82~120	192	7.5	19	6200
CTS(N,B)-1224	1200x2400	160	240	300	82~120	192	7.5	19	6200
CTS(N,B)-1230	1200x3000	148	165	190	80~150	240	7.5	19	7200
CTS(N,B)-1230	1200x3000	160	240	280	80~150	240	7.5	19	7200
CTS(N,B)-1530	1500x3000	180	240	300	90~170	270	11	14	8100
CTS(N,B)-1540	1500x4000	180	240	300	115~220	350	11	14	9300

Our Customers

Our Workshop

Staff Activities

Company Information

About SBM

SHANGHAI SHIBANG MACHINERY CO., LTD is one high-tech enterprise, which involves R&D, production, sales and service as well. In the past 20 years, we devote to producing mining equipments, sand making machines and industrial grinding mills, offering expressway, rail way and water conservancy projects the solution of making high grade sand and matched equipments.Till now, our products are sold to 130 countries, being the popular equipments in global crushing and grinding industry.
The head office of SBM is in Shanghai- the international financial centre. Here we have professional R&D institution and technology team, which make us world-class company. Here all SBM machines are designed produced, assembled and texted according to the ISO9001:2008.

About SBM Factory

SBM (Shanghai shibang machinery Co.,Ltd) has three factories, the gross area is about 2.3 million square meters. Various world-class CNC are in these factories, such as CNC VTL OPERATOR, Planing Machine, CNC heavy-duty horizontal lathe. These advanced equipments ensure that our products are of precise specification. Also, we have professional Quality inspection division, every machines produced must be examined strictly, the quality is guaranteed.

Why Choose Us

1. We are Manufacturer (Not Dealer):

All machineries from SHANGHAI SHIBANG MACHINERY CO., LTD are made by ourselves, with lower price, good quality and assured full after service.

2. Training & Service:

1.We provide you with the prophase plan, process flow design and manufacture equipment according to your special demand.

2.Send technicians to the jobsite for guiding the installation and adjustment, training operators and finishing the check and accept together with you.

3.We always keep certain inventory level of spare parts, which means the replacements can be shipped to you right away.

3. If you are new for this business:

Many thanks for your trust; we can provide you with design scheme for complete production lines, spot inspection and operator training according to your demands and the conditions of applied spot, we can help you choose the right equipments.

4. We’d like to recommend a suitable model for you and send you a best quotation. So please give us some more information about your requirement in your enquiry.

♥ What is the type and size of raw material?

♥ What is your required capacity(t/h)?