Hot sales high efficient iron ore magnetic separator south afrika
USD $4,000 - $9,999 /Set
Min.Order:1 Set
Shanghai Shibang Machinery Co., Ltd.
iron ore magnetic separator south afrika Introduction
The iron ore magnetic separator south afrika is generally a low cost method of recovery, unless high intensity separators are required. The electro-magnetic high intensity separators that produce 20,000 gauss; the rare earth iron ore magnetic separator south afrika is relatively inexpensive and can produce magnetic fields around 6,000 gauss. To different kinds of mineral ores, the application of iron ore magnetic separator south afrika is quite different.
Working principle of iron ore magnetic separator south afrika
The iron ore magnetic separator south afrika is mainly composed of cylinder, magneti system, trough and transmission part.After the ore slurry running into the trough through ore box an effected by the feeding ore water pipe, the ore particles can enter into the ore feeding area in trough. The magnetic ore particles can form ‘magnet group’ or ‘magnet chain’ by magnetic field’s affect. All the ‘magnet group’ or ‘magnet chain’ moves to magnetic poles because of magnetic force in the ore slurry and then they can be attached to the cylinder. Since the polarity of magnetic poles are arrayed alternately and fixed tightly when working, when ‘magnet group’ or ‘magnet chain’ turning with the cylinder, the non magnetic materials, such as matrix which are mixed with ‘magnet group’ or ‘magnet chain’ will drop down during the rolling process. Eventually, the ‘magnet group’ or ‘magnet chain’ attached to the cylinder surface are fine ore. When the fine ore turn to the weakest place of magnetic system in the cylinder, it will be pushed to the fine ore trough by the water coming from unloadore pipe. Non magnetic or weak magnetic ore are left in the ore slurry and then discharged out of the trough, these ore are the gangue. Some magnetic ore can be recycled by putting the gangue in iron ore magnetic separator south afrika again and then the recycle rate can be increased much. The fine ore can pass through the iron ore magnetic separator south afrika again and the matrix which mixing with the fine ore can be wiped out to upgrade the purity of fine ore.
iron ore magnetic separator south afrika features
1.High intensity. High garden, high power rare earth magnets
2.Available with flanges to suit square and round chutes
3.Available with angle deflectors above and between the tubes for heavy contamination
4.Direct access to magnets in chute
5.Easily installed and extremely easy to clean
The production line of iron ore magnetic separator south afrika
iron ore magnetic separator south afrika application
iron ore magnetic separator south afrika is suitable for the wet magnetic separation of the materials whose granularity is below 3mm such as magnetite, pyrrhotite, calcined ore and ilmenite and can also be used for emoving iron from the materials such as coal, nonmetal ore and building material. iron ore magnetic separator south afrika can be divided into three types according to trough’s different structure; they are downstream type, semi-reflux type and reflux-type.
Standard of iron ore magnetic separator south afrika :
Model | Roller size | Magnetic intensity on surface mT | Processing ability | Drive power | Roller rotary speed | Weight | |||
(Dia.xLength) | |||||||||
mm | Geometric center | average | highest | T/h | m3/h | Kw | Kg | ||
CTS(N,B)-46 | 400x600 | 130 | 160 | 1~3 | 5 | 1.1 | 45 | 600 | |
CTS(N,B)-66 | 600x600 | 145 | 170 | 5~10 | 16 | 1.1 | 40 | 750 | |
CTS(N,B)-69 | 600x900 | 145 | 170 | 8~15 | 24 | 1.1 | 40 | 830 | |
CTS(N,B)-612 | 600x1200 | 145 | 170 | 10~20 | 32 | 2.2 | 40 | 990 | |
CTS(N,B)-618 | 600x1800 | 145 | 170 | 15~30 | 48 | 2.2 | 40 | 1330 | |
CTS(N,B)-712 | 750x1200 | 120 | 155 | 180 | 15~30 | 48 | 3 | 35 | 1500 |
CTS(N,B)-718 | 750x1800 | 120 | 155 | 180 | 20~45 | 72 | 3 | 35 | 2100 |
CTS(N,B)-918 | 900x1800 | 148 | 165 | 190 | 25~55 | 90 | 4 | 28 | 2900 |
CTS(N,B)-924 | 900x2400 | 148 | 165 | 190 | 35~70 | 110 | 4 | 28 | 3500 |
CTS(N,B)-1018 | 1050x1800 | 148 | 165 | 190 | 40~75 | 120 | 5.5 | 22 | 4000 |
CTS(N,B)-1021 | 1050x2100 | 148 | 165 | 190 | 45~88 | 140 | 5.5 | 22 | 4500 |
CTS(N,B)-1021 | 1050x2100 | 160 | 240 | 280 | 45~88 | 140 | 5.5 | 22 | 4500 |
CTS(N,B)-1024 | 1050x2400 | 148 | 165 | 190 | 52~100 | 160 | 5.5 | 22 | 5000 |
CTS(N,B)-1024 | 1050x2400 | 160 | 240 | 280 | 52~100 | 160 | 5.5 | 22 | 5000 |
CTS(N,B)-1030 | 1050x3000 | 160 | 240 | 280 | 65~125 | 200 | 7.5 | 22 | 6200 |
CTS(N,B)-1218 | 1200x1800 | 148 | 165 | 190 | 47~90 | 140 | 5.5 | 19 | 5800 |
CTS(N,B)-1218 | 1200x1800 | 160 | 240 | 280 | 47~90 | 140 | 5.5 | 19 | 5800 |
CTS(N,B)-1224 | 1200x2400 | 148 | 165 | 190 | 82~120 | 192 | 7.5 | 19 | 6200 |
CTS(N,B)-1224 | 1200x2400 | 160 | 240 | 300 | 82~120 | 192 | 7.5 | 19 | 6200 |
CTS(N,B)-1230 | 1200x3000 | 148 | 165 | 190 | 80~150 | 240 | 7.5 | 19 | 7200 |
CTS(N,B)-1230 | 1200x3000 | 160 | 240 | 280 | 80~150 | 240 | 7.5 | 19 | 7200 |
CTS(N,B)-1530 | 1500x3000 | 180 | 240 | 300 | 90~170 | 270 | 11 | 14 | 8100 |
CTS(N,B)-1540 | 1500x4000 | 180 | 240 | 300 | 115~220 | 350 | 11 | 14 | 9300 |
SHANGHAI SHIBANG MACHINERY CO., LTD is one high-tech enterprise, which involves R&D, production, sales and service as well. In the past 20 years, we devote to producing mining equipments, sand making machines and industrial grinding mills, offering expressway, rail way and water conservancy projects the solution of making high grade sand and matched equipments.
The head office of SBM is in Shanghai- the international financial centre. Here we have modern production base of 2.3 million square meters, professional R&D institution and technology team, which make us world-class company. Here all SBM machines are designed produced, assembled and texted according to the ISO9001:2008.
Till now, our products are sold to 130 countries, being the popular equipments in global crushing and grinding industry. With the development of our SBM, we would like to help more and more customers start their business in mining and construction industries, offer them the best solution, much more advanced machinery and better service.
1. We are Manufacturer (Not Dealer):
All machineries from SHANGHAI SHIBANG MACHINERY CO., LTD are made by ourselves, with lower price, good quality and assured full after service.
2. Training & Service:
1.We provide you with the prophase plan, process flow design and manufacture equipment according to your special demand.
2.Send technicians to the jobsite for guiding the installation and adjustment, training operators and finishing the check and accept together with you.
3.We always keep certain inventory level of spare parts, which means the replacements can be shipped to you right away.
3. If you are new for this business:
Many thanks for your trust; we can provide you with design scheme for complete production lines, spot inspection and operator training according to your demands and the conditions of applied spot, we can help you choose the right equipments.
4. We’d like to recommend a suitable model for you and send you a best quotation. So please give us some more information about your requirement in your enquiry.
♥ What is the type and size of raw material?
♥ What is your required capacity(t/h)?