soccer field 30 meter high pole light ,stadium high mast light pole
USD $50 - $1,000 /Piece
Min.Order:10 Pieces
Jiangsu Milky Way Steel Poles Co., Ltd.
double arm or dual arm folding lighting mast with climb ladder
Morden design light poles with lighting equipment for a footbal filed
high mast light manufacture,steel high mast light pole low price
30m solar led high mast lighting factory, 30m solar led high mast lighting manufacturer
High quality 35m high mast lighting pole for America manufecture
high mast pole
Height | From 20 m to 50 m |
Suit for | Airport ,seaport , plaza, stadium , square ,highway, street way etc |
Shape | Conoid ,Multi-pyramidal , Columniform,polygonal or conical |
Material | Hot rolled steel, Q235,Q345,S235,S355,SS400,Gr 50 |
Tolerance of dimension | +- 2% |
Power | 400 W- 5000 W |
Light panel | material with hot dip galvanization steel frame ,stainless steel ,special aluminum plate |
Light Extension | Up to 30 000 m2 |
Lamp &Luminaire | Projector generally to be applied with safety grade IP65 Luminaire with high pressure sodium lamp of high mast pole , high mast lighting, high mast efficiency ,or metal halide lamp with high CRI |
Lifting system | Lifter fixed in the inner of the pole with lifting speed of 3~5 meter per minute Equipped electromagnetism brake and break –proof device, manual operation applied under power cut |
Electric appliance control device | Electric appliance box to be the holder of the pole ,lifting operation could be 5 meter away from the pole through wire Time control and light control could be equipped to realize full-load lighting mode and part lighting mode |
Surface treatment | Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required. |
Joint of Poles | Insert mode,innerflange mode,face to face joint mode . |
Design of pole | Against earthquake of 8 grade |
Wind Speed | 160 Km/Hour |
Minimum yield strength | 355 mpa |
Minimum ultimate tensile strength | 490 mpa |
Max ultimate tensile strength | 620 mpa |
Standard | ISO 9001 |
Length of per section | Within 14m once forming without slip joint |
Welding | We have past flaw testing. Internal and external double welding makes the welding beautiful in shape Welding Standard :AWS ( American Welding Society ) D 1.1 |
Thickness | 1 mm to 30 mm |
Production Process | Raw material test → Cutting →Molding or bending →Welding (longitudinal )→ Dimension verify →Flange welding →Hole drilling →Calibration → Deburr → Galvanization or powder coating ,painting →Recalibration →Thread →Packages |
Packages | Our poles as normal cover by Mat or straw bale at the top and bottom ,anyway also can following by client required , each 40HC or OT can loading how many pcs will calculation base on the client actually specification and data. |
We Are Manufacturer of high quality stadium lighting .
Jiangsu Milky Way Steel Poles Co.,Ltd , we have been a manufacturer and exporter of all kinds of high mast pole, including
street lighting pole, stadium lighting, floodlighting pole for large squares and other high mast pole since 1991.Our poles have been exported to more than 70 countries and areas.
stadium lighting type including single and double arms, round ,hexagonal and octagonal type, about the thickness and height we can do as specifc demands. We manufacture of stadium lighting, its height from 4M-12M. Our Capacity is : 10000 pcs per month for stadium lighting. We have over 15 years experience of manufacturing stadium lighting.
We own the big bending machine with the complete sets for the stadium lighting ,You can find our stadium lighting all over the China, and they are also installed in north American,south American Africa ,Europe and etc.Please check for detailed used football stadium lighting pole information in other sections of this website in our Download Center in our main website.
used football stadium lighting pole:
We focus on high quality.
Winter Olympic Games:
All the high mast pole of 2014 Sochi Winter Olympic Games are supplied by us.
lifting system:
Our lifting system of stadium lighting is the most advanced in China
1.Latch barrel with inner mounting bracket locker is mounted to an underside of the mast-top pulley assembly.
Furthermore, all steel cables are not exposed and more effectively protected.
2.Latching mechanism latched on steering arms is able to release strain on steel cables when in the operation position.
The process of latching on and off is stable and without vibration.
3.The bumper is designed on the luminary mounting bracket for avoiding direct damage between mast-top assembly and the raising luminary mounting bracket.
4.The leveling device for luminary support bracket is easy to operate and convenient to adjust level.
5.Special designed red-flag indicator has obvious visual effects and reflects actual situation of latching operation.
Production details:
Before shipment ,we have a final inspector manager to check the high mast products on every detail and component to make sure all stadium lighting meet the drawing.
Galvanization Test:
In every production procedure of stadium lighting. we have our isnpector around to check whether stadium lighting pole was done accrodingly with the drawing .
Production Process:
As an BV ,ISO ,SGS approved supplier in China ,we have more than 20 years produce and export stadium lighting ,and we can assure the stadium lighting pole we offerd is of sound quality which made from qualified material with our professional workers and advance equipment .
Material Test:
1.All of our material of stadium lighting are purchased from fanous mill factory to assure the quality of stadium lighting .
2.A mill certificate issused by the mill factory with stamp and signaturer must be provided beofere unload the material in
our factory ,otherwise we have our reason to refuse the material for stadium lighting pole.
3.Before put into high mast production ,all the material must pass the chemical and physical analysis to make sure that
stadium lighting have meet the requested strength and component for stadium lighting pole.
Packages:
Our stadium lighting as normal cover by Mat or straw bale at the top and bottom ,anyway also can following by client required , each 40HC or OT can loading how many pcs will calculation base on the client actually specification and data.
Trade terms:
1. Price Term: EXW, FOB, CFR or CIF.
The price includes pole shaft, base plate, cross arm and anchor part.
Shipping seaport: Shanghai Seaport. For FOB, CFR or CIF price, please specify which exact model you need, and tell us your order quantity so that we can calculate the local transport charges and sea freight.
2. MOQ: 1 sets for Customized
3. Payment: Typically 30% by T/T as deposit, balance by T/T or L/C at sight before shipment. Other payment way can be negotiated.
4. Package: Customized for stadium lighting.
5. Delivery: for stadium lighting 30 sets, goods can be ready for shipment within 10 workdays after receiving deposit.
6. Parts Design Service Period: 20 years
Application:
Highway stadium lighting Park stadium lighting
Main roads stadium lighting Dock stadium lighting
Secondary roads stadium lighting Stadiums stadium lighting
Storage-yard stadium lighting Overpass stadium lighting
Industrial-plant stadium lighting Toll-station stadium lighting
1.Easy work: more than 23 years in stadium lighting field, 10 years in high mast field. quickly understand your meaning and let you get your result. |
2.Lowest MOQ: for stadium lighting lowest quantity from 1Ton depends on different style . |
3.OEM Accepted: We can produce any pole of your design for stadium lighting. |
4.Good Service: We treat clients as friends. |
5.Good Quality: We have very strict quality control system for stadium lighting. Good reputation in the high mast pole market. |
6.Fast & Cheap Express service: We have big discount from forwarder (Long-term Contract with TNT,DHL,UPS,FEDEX,EMS ). |
7.Quickly delivery: For stadium lighting, 300 pieces/day. |
Certified name Certificate No. Expired Date Product Scope Certifie Picture
ISO 9001:2008 04320Q29536R0S 2016/04/12 Production and Service of high mast
light Steel Tube Pole and high mast light
Support, Metal Steel Tube Pole for Lighting,
Steel Prop and Portal Structure for Contact
Line in high mast light field.
Report Name Report By Product Name & Model No. Report Date
Test Report Electric Power Industry Transmission Steel Tube Pole 2012/09/27
Tower Quality Inspection & 220ZGG1-32-ZZ
and Test Center
Our high mast, street lighting pole,street lighting poles,street high mast, high mast pole, high mast poles, high mast lighting, high mast, high mast lamp pole, high mast lamp poles, high mast lighting pole, high mast lighting poles, high mast lighting steel pole, high mast lighting steel poles, flag mast stainless steel pole, high mast pole price, flag mast stainless steel poles, steel pole, steel poles , hot-dip-galvanized steel poles ,lamp poles ,road poles, street lighting poles, street lamp poles,solar street lamps steel poles ,high mast lamp poles, road lamp poles, the steel street lamp poles, hot-dip-galvanized steel lighting ,outdoor lighting ,outdoor lamps ,street lighting poles ,steel post ,street poles, lamp parts ,lighting fixture ,lighting poles ,lighting equipment ,lighting decoration ,lighting product , street lighting body, high mast lighting steel poles &tower, round & square street lighting steel poles with double arm or single arm . stainless steel poles, aluminum street light poles, traffic lighting steel poles, base plate , bearing plate, base flanges , are made by hot-roll steel coil ,the process as cut plate, bending ,forming, automatic welding, drill holes ,quality check before galvanized, hot dip galvanized or powder coating.s ,quality check before galvanized, hot dip galvanized or powder coating.