Specifications
thin flexible plastic sheets1.Non toxic
2.Exellent flexibility
3.Density: 0.92g/cm3
4.Self lubrication
low density polyethylene thin flexible plastic sheets
Description
LDPE are ideal for general users, They are mainly used for cleanness of home, test, food or defend of industry or agriculture.
Advantages:
- High concentration pigment with bright colors.
- More uniform and thinner pigment particle.
- Much better dispersity
- Much better compatibility of masterbatches with the raw material than normal masterbatch
- High quality brings customers low wastage and cost
Applications:
HDPE (high density PE) - is used in products and packaging such as plastic bags, milk jugs, detergent bottles, margarine tubs, garbage containers, water pipes, woven bag, raincoat, polyethylene monofilament, woven yarn etc.. LDPE resins are made by high pressure autoclave process and mainly used for blown film extrusion and wire coating (cable sheath) etc.. They are widely used for applications for general purpose packaging films, heavy duty bags, shrink films, and foams.
Technical data
Physical Properties | Test Method | Nominal Value | Unit | |
Density | ISO 1183 | 0.921 | g/cm3 | |
Melt Mass-Flow Rate (MFR) | ISO 1133 | 1.9 | g/10min | |
Hardness |
|
|
| |
Shore Hardness (shore D) | ISO 868 | 45 |
| |
Mechanical Properties |
|
|
| |
Tensile Modulus | ISO 527-2 | 175 | MPa | |
Tensile Strength | Yield, | ISO 527-2 | 9.0 | MPa |
Break, | 13.0 | MPa | ||
Tensile Strain(Break) | ISO 527-2 | 850 | % | |
Modulus of Elasticity | Internal Method | 250 | MPa | |
Thermal |
|
|
| |
Vicat Softening Temperature | ISO 306/A50 | 89.0 | °C | |
Melting Temperature (DSC) | DIN 53765 | 108 | °C | |
Peak Crystallization Temperature (DSC) | DIN 53765 | 97.0 | °C | |
Heat of Fusion | DIN 53765 | 110 | J/g | |
Electrical |
|
|
| |
Volume Resistivity | ASTM D257 | 8.5E+15 | ohm •cm | |
Dielectric Strength | ASTM D149 | 30.0 | kV/mm | |
Dielectric Constant (60Hz) | ASTM D150 | 2.20 | % | |
Dissipation Factor (60 Hz) | ASTM D150 | 0.00050 |
|