Specifications

thin flexible plastic sheets
1.Non toxic
2.Exellent flexibility
3.Density: 0.92g/cm3
4.Self lubrication

low density polyethylene thin flexible plastic sheets

 

Description

LDPE are ideal for general users, They are mainly used for cleanness of home, test, food or defend of industry or agriculture.

Advantages:

1. High concentration pigment with bright colors.
2. More uniform and thinner pigment particle.
3. Much better dispersity
4. Much better compatibility of masterbatches with the raw material than normal masterbatch
5. High quality brings customers low wastage and cost

Applications:

HDPE (high density PE) - is used in products and packaging such as plastic bags, milk jugs, detergent bottles, margarine tubs, garbage containers, water pipes, woven bag, raincoat, polyethylene monofilament, woven yarn etc.. LDPE resins are made by high pressure autoclave process and mainly used for blown film extrusion and wire coating (cable sheath) etc.. They are widely used for applications for general purpose packaging films, heavy duty bags, shrink films, and foams.

Technical data

Physical Properties		Test Method	Nominal Value	Unit
Density		ISO 1183	0.921	g/cm3
Melt Mass-Flow Rate (MFR)		ISO 1133	1.9	g/10min
Hardness
Shore Hardness (shore D)		ISO 868	45
Mechanical Properties
Tensile Modulus		ISO 527-2	175	MPa
Tensile Strength	Yield,	ISO 527-2	9.0	MPa
	Break,		13.0	MPa
Tensile Strain(Break)		ISO 527-2	850	%
Modulus of Elasticity		Internal Method	250	MPa
Thermal
Vicat Softening Temperature		ISO 306/A50	89.0	°C
Melting Temperature (DSC)		DIN 53765	108	°C
Peak Crystallization Temperature (DSC)		DIN 53765	97.0	°C
Heat of Fusion		DIN 53765	110	J/g
Electrical
Volume Resistivity		ASTM D257	8.5E+15	ohm •cm
Dielectric Strength		ASTM D149	30.0	kV/mm
Dielectric Constant (60Hz)		ASTM D150	2.20	%
Dissipation Factor (60 Hz)		ASTM D150	0.00050