Product Details

Product presentation:

HR5100 series of tower / rack special inverter power supply system is a new generation of intelligent special inverter which is for communication system, railway system, power system. This series product applies SPWM pulse width modulation, outputs pure sine wave, and has good transient reponse, small waveform distortion characteristics, which can meet the requirements of high-quality power supply and high reliability. It is also applicable to AC power uninterrupted sine wave supply system which is sensitive to power interence and also needs stable, reliable, sensitive, purification.

HR5100 series are mainly used in all types of digital communications equipment, backstage management of locomotive monitoring and terminal equipment, substation automatic device and transmitter etc.which use 48V /110V / 220V DC screens as the mian power supplies, and meanwhile, the other equipment needs AC 220V power tower applications.

HR500 series can be customized for the DC panel main, the alternating current bypass standby; also can be customized for the AC rectifier input main, DC screen standby working mode.

Technical characteristics:

1.Design in muilt modes can improve system usablity and aglity.

2.High reliable design, ensuring the running stability of the system

3.The perfect protection function, ensure the stability and reliability of the system

4.The humanizital operation interface and network function, make opertation easily.

Technical data:

Model	Special series for comminication	Special series for raliway	Special series for power
Tower type model	HR5101C~ HR5110C	HR5101D~HR5115D	HR5101E~HR5140E
Tower type capcacity	1~10KVA	1~15KVA	1~40KVA
Rack type model	HR5101C-RM~ HR5110C-RM	HR5101D-RM~ HR5110D-RM	HR5101E-RM~ HR5110E-RM
Rack type capacity	1~10KVA	1~10KVA	1~10KVA
DC screen or battery input
DC voltage	-48V	110V	220V
Allowbale change range	40-60V	92-137V	184-275V
Relative harmonic wave	<40mV
Stranded input anti-irrigate relatively broadband noise current	When Input voltage and load current is rated value, it is less than 10%.
DC input anti-irrigate relatively phone balance weight noise current	≤ input current 1%
AC bypass input
Voltage	Single phase 198~242VAC
Frequency	50(60) Hz ±5%
AC commute input
Voltage	220VAC±25%380VAC±20% Single phase220VAC±25%ORthree phase 380VAC±20%
Frequency	50(60) Hz ±5%
Input power factor	>0.8
DC output
Voltage	220VAC Single phase 220VAC
Frequency	50(60) Hz
Voltage stability	±1%
Frequency stability	±0.5% ±0.5% (no bypass power)
waveform	SPWM sine wave
Power factor	0.8(lag)
Distortion	<2% <2%(Linear load)
Instant response	Voltage change ≤4%(100% load into or cut out)
Dynamic characteristic	Load current output when current is changed from 25%-50%-75%
	Voltage change≤12%, response time ≤60ms
Relative harmonics wave content	When Input voltage and load current is rated value, it is ≤6%
Conducted interference limits	0.15-0.5MHz, quasi-peak <79dB, with an average <66dB
	0.15-30MH, quasi-peak <79dB, with an average <60dB
Input current crest factor	3:1 (Max.)
Rated output power	>89%
Overload capacity	Load current is 120%-150% to rated value, it jumps to bypass automatically after 60s, and resume automatically.
Time for inverter transmit to bypass	≤1ms