RF radio frequency slimming machine is applied to:

• Sculpture

• Fat removal

• Radio frequency slimming

• Make the pores contracted

• Increase blood circulation

• Face lifting

• Improve lymph drainage

Specifications

2.40Khz 1Mhz cavitation, vacuum liposuction
3.body contouring

liposuctionultrasonic liposuction cavitation slimming machine ultrasound cavitation rf vacuum cavitation BS-05

 

1.Working Theory:

 
Vacuum and Ultrasonic CavitationBeauty Equipmentultrasonic

 

Technology Explanation

High Intensity Focused Ultrasound penetrates focused and volumetric ultrasonic energy at precise depth (1.2 cm) in subcutaneous fat layers targeting fat tissue causing a non-thermal effect. The surrounding structures such as the epidermis, blood vessels and nerves will not be damaged. Meanwhile the metabolized contents (triglyceride, fatty acid) of cells will excrete outside body automatically through blood circulation and lymphatic drainage without harm to the human body.

1. Working Course

 

 

3.1Working steps:

 

Special tips: 1. Check whether all the accessories are properly connected, clean and disinfect the equipment accessories

 

2. Power on the machine, and turn on the machine on the back. There shows the Chinese/English on the low-left part on the screen. Please choose the language you want.

 

3. Click the machine picture, and then it shows the operating interface.

 

 

 

  Step ONE: Break the fat cells.

 

 

Spare part: M80 US head(40kHz)

 

Time: 20mins

 

 

 

  Step Two

 

Spare part: M50 US head (40kHz)

 

Time: 10mins

 

Operation Ways:

 

a)Click the time,so the arrow will appear,then click the arrows on the two sides of “Start/ Pause” button to set up the time.

 

b)Click the pictures of “M50-Mode”, (screen will show the green “∨” signal), there is 10 different ultrasoni modes (P1-P10). The frequency is from slow level to fast level,so please choose the right mode according to the treatment demand. Then click the “M50-Intensity” button,and click the arrows on the two sides of “Start/ Pause” button to decrease and increase the intensity.(The original setting is from 5W/cm²²

 

After the operation,click the “Start/ Pause” button to pause the work.Click the “M80-Mode” button,the signal under the M80-Mode Head picture will change into red “X”,so this spare part stops working.

 

 

 

  Step Three:Vacuum and Remove fat

 

 

Spare part: Vacuum+Blue led head (1 MHz)

 

 

Time: 30mins

 

 

Operation Ways:

 

 

Click the time, so the arrow will appear, and then click the arrows on the two sides of“Start/ Pause” button to decrease and increase the time.

 

 

 

a)    Vacuum Mode Adjustment

 

Click the “Vacuum-Mode” button, (The screen will show green ∨

 

 

 

b) Vacuum Intensity Adjustment

 

Click “Vacuum Intensity” button firstly. The fixed data is from 10 to 100Kpa. Then click the arrows on the two sides of the “Start/ Pause” button to choose the right intensity.

 

 

 

c) Vacuum Inhaling Adjustment

 

Click “Vacuum Inhale-T” button to adjust the sucking time. The fixed inhaling time is 3.0S.(1-3 means the manual control mode, and the inhaling time can be adjusted according to the treatment demand;4-6 means the automatic mode, the Mode 4’s inhaling time is 8s,the Mode 5’s inhaling time is 13s,the Mode 6 is the continuous inhaling mode.) Please choose the right mode according to different treated part by clicking the arrows besides the “Start/ Pause” button).

 

 

 

d)Vacuum Deflating Adjustment

 

Click “Vacuum Deflate-T” button to adjust the sucking time. The fixed inhaling time is 3.0S.(1-3 means the manual control mode, and the inhaling time can be adjusted according to the treatment demand;4-6 means the automatic mode, the Mode 4’s inhaling time is 8s,the Mode 5’s inhaling time is 13s,the Mode 6 is the continuous inhaling mode.) Please choose the right mode according to different treated part by clicking the arrows besides the “Start/ Pause” button).

 

 

 

e)Ultrasonic Mode adjustment

 

Click “Supersonic Mode” button. There is 10 different working modes from this machine, the frequency is from slow level to fast level. Then click the arrows on the two sides of the “Start/ Pause” button to choose the right intensity.

 

 

 

f) Ultrasonic Intensity adjustment

 

Click “Supersonic Intensity” button to adjust the ultrasonic intensity,It can be from 0.5 W/cm²²

 

After adjusting all the functions, click the “Start/ Pause” button, the working signal will flash, so the machine will be in working status.

 

After the operation, click the “Start/ Pause” button to pause the work. Click the “M50-Mode” button, the signal under the Head picture will change into red X, so this spare part stops working.

 

 

 

l        Step Four: Locating and tightening

 

Spare part:4X Light-wave location plate (80Khz)

 

Time: 10mins

 

 

 

 

3.2 Gesture suggestion

 

 

 

Vacuum Bipolar RF
For body and face re-shaping. Weight loss Vaccum+RF fat-explosion function can promote tissue metabolism,repel the cellulite, which make fat granule in different depths and shocking make fusion energy, and the deepest receptor can get granule in 3CM thick of skin, and rapid expansion and the rapid heating of the cell wall that exceed the elastic limits and arises cells broken, so that the combustion of fatty acids at the same time broken out of a pot, not only the burning consumption of fatty acids but also more directly emptying so rapidly reduce the size of granule.

How does RF works?

The multi-polar radio frequency causes a reaction in the tissue which stimulates the body's natural healing response causing new collagen to form, and the production of new elastin fibres making skin to look and feel firmer.

Skin is heated consistently and uniformly without the risk of any burns.

How does Vacuum works?

After break up the subcutaneous fat, decrease cellulite accumulation. It helps smooth lymph and discharges the fatty acid and toxin that is decomposed through lymph system.

Vacuum hads immediate effect in body shaping.