Product Details

Application

1. Fat dissolving & slimming & Body shaping

2. Promote tissue metabolism, whiten skin

3. Improve orange peel organization, Repair pregnant lines

4. Active collagen, Face lifting, strengthen the skin elasticity

5. Remove epidermis and deeper wrinkles

6. Anti-aging for face and body

7. Alleviate eye pouch

8. Pore missing

9. Promote blood circulation, Reduce fatigue

Specifications

2.40Khz 1Mhz cavitation, vacuum liposuction
3.body contouring,slimming
4.Tightening, lifting
5.massage

BS-05 sales promotion!!!New Product Home Use Ultrasonic Liposuction Cavitation Slimming Machine

1.Working Theory:

Vacuum and Ultrasonic CavitationBeauty Equipmentultrasonic

1.2 Function

Tighten the flabby skin.

Increase the body’s metabolic rate; help the body excrete waste and moisture quickly.

Repair striate gravid arum.

Relax the muscles, lift the muscle cramps, and ease muscle pain and so on.

Lose weight.

Effectively cure the orange peel skin on buttock or thigh, solve the problem of the flabby abdominal skin after procreating or liposuction

1.3 Technical Advantages

Adopt the top ultrasonic liposuction technique in the world.

Suitable for all kinds of skin.

Comfortable, painless, woundless during the treatment.

Easy operation, easy study.

Non-exhaustion, low cost investment and quick high returns..

1.4 Features

Free operation, .

No bleeding, tumidness and bruise.

No side effects, good effects, no rebounding phenomenon. Woundless, will not influence the normal working and living.

Product Introduction

2.1 Touch screen display

2.2 Accessories Illustration

Vacuum+Blue led head (1Mhz): Negative pressure push the fat cells, accelerate the fat metabolism, promote the body lymph drainage, get the fat-sucking and body shaping effect with no-needle.

M50 US head(1Mhz): Strongly break down the fat cells.

M80 US head (40kHz): Strongly break the fat cells to pieces, and produce the inner exploding and melting.

4X Light-wave location plate(80Khz): Locate and tighten the skin, enhance the skin elasticity, accelerate to dissolve the Triglyceride, and make it exhause out of the body throu liver and sausage circulation.

2.3 INSTALLATION & WIRING

Socket of 4X-1;
Socket of 4X-2;
Socket of 4X-3;
Socket of 4X-4
Socket of Vacuum+Blue led head (1Mhz)
Socket of M50 US Head(1Mhz)
Socket of M80 US head (40kHz)
Socket of Foot Pedal.

2.4 ACCESSORIES LIST

Description Best effetive body slimming shaping fat reduce ultrasonic liposuction cavitation slimming machine Cavitation can use 40khz ultrasound to break up fat cells effectively. The broken fat cells will then be absorbed and metabolized out of the body by the lymphatic system. RF energy affects the deeper dermal layers, meaning that the result is a lifted contour, a decrease in deep wrinkles, thicker and firmer skin. RF promotes new collagen protein which causes the original collagen protein to strengthen the skin.	Qty.
Vacuum+Blue led head (1Mhz)	1pc
M50 US head(1Mhz)	1
M80 US head (40kHz)	1
4X Light-wave location plate(80Khz)	4pcs
Foot Pedal/ Power cord	1pc each
English manula	1book

Technical advantages of cavitation vacuum slimming machine:

Adopt the top ultrasonic liposuction technique in the world, Vacuum + bipolar RF and multipolar RF and cooling treatment perfect combination

Suitable for all kinds of skin.

Comfortable, painless, woundless during the treatment.

Easy operation, easy study.

Non- exhaustion, low cost investment and quick high returns

Working Course

3.1Working steps:

Special tips: 1. Check whether all the accessories are properly connected, clean and disinfect the equipment accessories

2. Power on the machine, and turn on the machine on the back. There shows the Chinese/English on the low-left part on the screen. Please choose the language you want.

3. Click the machine picture, and then it shows the operating interface.

Step ONE: Break the fat cells.

Spare part: M80 US head(40kHz)

Time: 20mins

Step Two

Spare part: M50 US head (40kHz)

Time: 10mins

Operation Ways:

a)Click the time,so the arrow will appear,then click the arrows on the two sides of “Start/ Pause” button to set up the time.

b)Click the pictures of “M50-Mode”, (screen will show the green “∨” signal), there is 10 different ultrasoni modes (P1-P10). The frequency is from slow level to fast level,so please choose the right mode according to the treatment demand. Then click the “M50-Intensity” button,and click the arrows on the two sides of “Start/ Pause” button to decrease and increase the intensity.(The original setting is from 5W/cm²²

After the operation,click the “Start/ Pause” button to pause the work.Click the “M80-Mode” button,the signal under the M80-Mode Head picture will change into red “X”,so this spare part stops working.

Step Three:Vacuum and Remove fat

Spare part: Vacuum+Blue led head (1 MHz)

Time: 30mins

Operation Ways:

Click the time, so the arrow will appear, and then click the arrows on the two sides of“Start/ Pause” button to decrease and increase the time.

a) Vacuum Mode Adjustment

Click the “Vacuum-Mode” button, (The screen will show green ∨

b) Vacuum Intensity Adjustment

Click “Vacuum Intensity” button firstly. The fixed data is from 10 to 100Kpa. Then click the arrows on the two sides of the “Start/ Pause” button to choose the right intensity.

c) Vacuum Inhaling Adjustment

Click “Vacuum Inhale-T” button to adjust the sucking time. The fixed inhaling time is 3.0S.(1-3 means the manual control mode, and the inhaling time can be adjusted according to the treatment demand;4-6 means the automatic mode, the Mode 4’s inhaling time is 8s,the Mode 5’s inhaling time is 13s,the Mode 6 is the continuous inhaling mode.) Please choose the right mode according to different treated part by clicking the arrows besides the “Start/ Pause” button).

d)Vacuum Deflating Adjustment

Click “Vacuum Deflate-T” button to adjust the sucking time. The fixed inhaling time is 3.0S.(1-3 means the manual control mode, and the inhaling time can be adjusted according to the treatment demand;4-6 means the automatic mode, the Mode 4’s inhaling time is 8s,the Mode 5’s inhaling time is 13s,the Mode 6 is the continuous inhaling mode.) Please choose the right mode according to different treated part by clicking the arrows besides the “Start/ Pause” button).

e)Ultrasonic Mode adjustment

Click “Supersonic Mode” button. There is 10 different working modes from this machine, the frequency is from slow level to fast level. Then click the arrows on the two sides of the “Start/ Pause” button to choose the right intensity.

f) Ultrasonic Intensity adjustment

Click “Supersonic Intensity” button to adjust the ultrasonic intensity,It can be from 0.5 W/cm²²

After adjusting all the functions, click the “Start/ Pause” button, the working signal will flash, so the machine will be in working status.

After the operation, click the “Start/ Pause” button to pause the work. Click the “M50-Mode” button, the signal under the Head picture will change into red X, so this spare part stops working.

l Step Four: Locating and tightening

Spare part:4X Light-wave location plate (80Khz)

Time: 10mins

3.2 Gesture suggestion

Competitive advantages

1. the latest design

2.easy to operation and maintain

3.offer OEM/ODM service

4.Comfortable, painless, woundless during the treatemnt.

5.Easy operation, easy study.

6.Non- exhaustion, low cost investment and quick high returns