Specifications

Deep Sea Genset Controller DSE501K
1.10 years Factory sales
2.2 year warranty
3.3days delivery

Deep Sea Genset Controller DSE501K 

 

  

Deepsea Start Controller DSE501K is a manual start controller is a basic and effectual unit of DEEP SEA.

 

The model 501K is a Manual Engine Control Module, which is designed to manually control the engine via a key switch on the front panel. The module is used to start and stop engine, indicating fault conditions, automatically shutting down engine and indicating engine failure by LED giving true first up fault annunciation.

*POWER
501K use a key to start the diesel. The power come from a battery or a low DC power with DC 9V~33V.

*SWITCH MODE
501K can be turn with a key to set the different state OFF, RUN, START.
OFF STATION: When the key is placed here the input power has cut off, all the system was in dormancy.
RUN STATION: When the key is placed here the running relay are working, fuel loop and the ignition system are working, the protect relay was awaked and the engine can be start. Now there is no any alarm export.
START STATION: When the key is placed here then to loosen immediately, the key will return to RUN station. When turn the key here, the output terminal will export a start signal. This controller has 4 alarms: Oil pressure, High temperature, charge lose, over speed or fault of plant.

 

*specification

Power voltage: 9~33vdc
Generator input: 15~305vac rms
Generator frequency input: 50~60hz (when the engine runs in rated speed. )
Magnet sensor output: 0.5~± 80v
Magnet sensor frequency: 2300~6000hz
Runing relay: 16amp dc (under power voltage)
Start output: 16 amp dc (under power voltage)
Alarms output: 1amp dc (under power voltage)
Tachometer output: 1ma fsd 75ohm meter
Working temperature: -30o C~ +70o C
Size: 72mm*72mm*118.5mm ( not include the key

 

DC Supply:	9 to 33 V Continuous.
Cranking Dropouts:	Able to survive voltage dips during cranking. This is achieved without the need for internal batteries.
Alternator Input Range:	15 - 305 V AC RMS
Alternator Input Frequency:	50 - 60 Hz at rated engine speed.
Magnetic Input Range:	0.5 V to +/- 80 V
Magnetic Input Frequency:	2300Hz to 6000 Hz at rated engine speed.
Start Relay Output:	16 Amp DC at supply voltage.
Run Relay Output:	16 Amp DC at supply voltage.
Alarm Output:	1 Amp DC at supply voltage.
Dimensions:	72 X 72 X 118.5 (Excluding Key-switch)
Operating Temperature Range:	-30 to +70°C
Installation:	Front panel mounting via suitable cut-out. Retaining clips supplied. Cable connections via locking plug and socket type connectors.
Calibration:	Speed trip setting and meter calibration adjustment potentiometer are accessible from the rear of the module.

 

Products Pictures:

 

Please choose a shipping method and pay for the order including the shipping fee.

We arrange by DHL normally,special request pls let us know.

 

Normal working date from Monday to Saturday. Except special holiday.

Time of Arrival :Economic DHL for example, (time spending for remote area)

•   Asian 1-3 Days   
•  Middle EAST:4-6Days
• Europ:6-7days

We do not uarantee delivery time on all international shipments due to differences in customs clearing times in individual countries, which may affect how quickly your product is inspected. Please note that buyers are responsible for all additional customs fees, brokerage fees, duties, and taxes for importation into your country. These additional fees may be collected at time of delivery. We will not refund shipping charges for refused shipments.The shipping cost does not include any import taxes, and buyers are responsible for customs duties.

 

Within 2years,if there is any problem with the item,buyers can returns the items to exchange another new one,buyers are responsible for the shipping fees and customs duties.   Or add item into your next order by free.

 Pls confirm the address and your TEL number for delivery to against any mistake

Link to this item in our ALIEXPRESS STORE:/store/405763

Quality Control and testing:

  

Delivery ING:

  

1.Parbeau set up on year 2003,Deal with 80% local market,supply 3000 pcs /Month   

2.First AVR Factory in Fuan ,Nearly 10 Years Factory

3.Imported Vima Capacity with other parts from Nation Owned Company

4.Products test: Each product test 3tims before put in Package 

5.PE Cover Final Packing for AVR