Product Details

sawdust dryer for briquette making

1.Sawdust Dryer For Briquetting Making Introduction

With the development of science and technology and resources nervous, wood chips, (sawdust), and all kinds of straw, edible mushroom residue has been discarded by the waste products become available resources, used for production of wood products and made high combustion value of biofuels, these require sawdust and broken worse slag after drying process.
Weilite design and production of new energy-saving special sawdust dryer is a large quantity of drying equipment, it is according to the specific characteristics of wood chips, on the analysis of the structure of the dryer effect of yield and quality of wood chip design and manufacturing.
According to the characteristics of the wood material on how to improve the material filling rate and material in the cylinder body residence time of the dryer for problems such as the comprehensive technical renovation, a new combined feed device, no wind tunnel phenomenon of material, make sawdust can fully heat, dehydration.

2.Working Principle Of Sawdust Dryer
It consists of a horizontally inclined rotating cylinder. Material is fed at one end and discharged at the other end. In directtype rotary dryers, hot gases move through the cylinder in direct contact with the material, either with or against the direction of its flow.

3.Sawdust Dryer Features:
Sawdust dryer is belong to single channel dryer, it is by the joint action of rotating cylinder body of air flow and the rotor, the wet material in the drum formation of approximate spiral trajectory, concrete has the following advantages:

Wood chip dryer can be done in a relatively short period of time, drying, the drying rate.
The spiral guide plate inside the tube, the heat flow forming spiral linear flow field inside the drum, to increase the retention period of the heat flow in the dryer.
Material stay within the cylinder for a long time, will improve the efficiency of material drying, to reduce the heat consumption.
Material uniform distribution within the cylinder, and the heat evenly.
The spiral guide plate inside the tube, the heat flow forming spiral linear flow field inside the drum, to increase the retention period of the heat flow in the dryer.
Single channel drying equipment has simple structure, easy maintenance.
This series of wood shavings dryer durable, long service life.

4.Sawdust Dryer Technical Parameter

Model (mm)	Gradient (%)	Rotational ( r/min )	Inlet air temperature ( ºC)	Power (kw)	Production capacity (t/h)	Weight (t)
φ 600 × 6000	3-5	3-8	≤ 700	3	0.5-1.5	2.9
φ 800 × 8000	3-5	3-8	≤ 700	4	0.8-2.0	3.5
φ 800 × 10000	3-5	3-8	≤ 700	4	0.8-2.5	4.5
φ 1000 × 10000	3-5	3-8	≤ 700	5.5	1.0-3.5	5.6
φ 1200 × 10000	3-5	3-8	≤ 700	7.5	1.8-5	14.5
φ 1200 × 12000	3-5	3-8	≤ 700	11	2-6	14.8
φ 1500 × 12000	3-5	2-6	≤ 800	15	3.5-9	17.8
φ 1800 × 12000	3-5	2-6	≤ 800	18	5-12	25
φ 2200 × 12000	3-5	1.5-6	≤ 800	18.5	6-15	33
φ 2200 × 18000	3-5	1.5-6	≤ 800	22	10-18	53.8
φ 2200 × 20000	3-5	1.5-6	≤ 800	30	12-20	56
φ 2400 × 20000	3-5	1.5-5	≤ 800	37	18-30	60
φ 3000 × 20000	3-5	1.5-5	≤ 800	55	25-35	78
φ 3000 × 25000	3-5	1.5-5	≤ 800	75	32-40	104.9

5.Our Services For Sawdust Dryer

If any interest in our sawdust dryer, please feel free to contact me and let me know your requirement on capacity and wood chips moisture.
We are professional machine manufacturer, we will help to choose the most suitable machine for you.
Quality Commitment: Quality Warranty, Grantee Period: 1 year. Supply wearing parts with favorable price and long term after-sales service.
If you need, we will dispatch professional engineer for installation, trail and worker training.

6.Sawdust Dryer For Briquette Making Packaging And Shipping

7.FAQ About Sawdust Dryer

1).What's the raw material that can be dried?

Answer:Any kind of sawdust and wood material can be dried by our machine.

2).What kind of fuel can be used with the dryer?

Answer:Gas, Diesel, Coal, Wood and other solid fuels.

3).What's the drying type of your dryer?

Answer:Hot Air Drying Type.

4).Can we adjust the drying temperature?

Answer:Yes, we can adjust the drying temperature by adjusting the hot air inlet volume.

8.Installation Commissioning For Sawdust Dryer

on the basis of the device should be installed in a horizontal concrete, land bolt is fixed.
when installation should pay attention to the main body of vertical and level.
check each part after installation bolt fastening, the presence of loosening and host storehouse door whether such as welcome to tighten.
according to the equipment power configuration of power and control switch.
check finished, empty load test, the test can be normal production.

We can design the machine according to your special requirement, so if the specification is not listed , please contact me directly!

Hot Sercice Line:+86-371-86687769

Personal Phone:+86 15639260527

Contact Me:Ms Sandy Shi