wet air polisher - RZ5500AR
USD $120 - $150 /Piece
Min.Order:1 Piece
Concrete Rear-exhausi Air Wet Polisher
General Description: The Pneumatic Water Sander is a versatile sander, which can be used for any hard material and any profile to sand the uneven surface, especially, ideal to sand the marble, stone etc., construction material
Remarks:
1.The R.F.L. unit must inatalled between the air compressor & sander.
2. Due to assure the servicing life & operating smooth which must lubricated on the air inlet hole with #10 lubricating oil litter about 4 hours each.
3. The sanding pad must assured lock on the sanders.
4. In order to develop the high rate efficiency which employed at over heavy pressure is prohibited.
5. After sanding processing is over, which must lubricated on th air inlet hole with #10 lubricating oil and rotated idly about
10 sec. Esprcially to clean the dirty in the sanders.
Item No. | RZ5500AR |
Air Consumption | 16cfm(0.45m3 /min |
Air Pressure | 90Psi |
Shaft Thread | 5/8" -11;M14;M16 |
Air Inlet | 1/4"Npt |
Max Pad Diameter | 5" |
No load Rev Speed | 0-5500RPM |
N.W | 1.29KG |
Best wet polishing pad
Standard wet polishing pad (SWPP 3"4"5“6”)
http://www.china.cn/product-gs/812619071/Wet_Polishing_Pad.html
More information, please check out website http://kakatire.en.china.cn/