Specifications

rear-exhaust air wet polisher
1.high effciency
2.long life
3.variable sander

 

 

 

Concrete Rear-exhausi Air Wet Polisher 

 

General Description: The Pneumatic Water Sander is a versatile sander, which can be used for any hard material and any profile to sand the uneven surface, especially, ideal to sand the marble, stone etc., construction material

 

Remarks:

1.The R.F.L. unit must inatalled between the air compressor & sander.

2. Due to assure the servicing life & operating smooth which must lubricated on the air inlet hole with #10 lubricating oil litter about 4 hours each.

3. The sanding pad must assured lock on the sanders.

4. In order to develop the high rate efficiency which employed at over heavy pressure is prohibited.

5. After sanding processing is over, which must lubricated on th air inlet hole with #10 lubricating oil and rotated idly about

10 sec. Esprcially to clean the dirty in the sanders.

 

 

 

Item No.	RZ5500AR
Air Consumption	16cfm(0.45m3 /min
Air Pressure	90Psi
Shaft Thread	5/8" -11;M14;M16
Air Inlet	1/4"Npt
Max Pad Diameter	5"
No load Rev Speed	0-5500RPM
N.W	1.29KG

 

 

Best wet polishing pad

 

 

Standard wet polishing pad (SWPP 3"4"5“6”)

 

http://www.china.cn/product-gs/812619071/Wet_Polishing_Pad.html

 

More information, please check out website   http://kakatire.en.china.cn/