Name: hard metal plate for making 24 and 39 holes tungsten carbide draw plate
Brand: Kerui
Availability: InStock

Product Details

hard metal plate for making 24 and 39 holes tungsten carbide draw plate

Kerui Hard Metal Plate,made from 100% virgin tungsten carbide raw materials.It can be used in wide application field. Kerui Hard Metal Plate have high hardness, good red hardness,excellent wear resistance, High Elasticity Modulus and compressive strength.The chemical properties of our tungsten carbide plates is stable,also the impact toughness & dialatation coefficient is low. The heat-conducting property and electrical conductivity of tungsten carbide plate is close to iron or iron alloy.

It is a very good material to produce the parts to resist high temperature & corrosion, also it is widely used as wear parts and shielding parts. We provide you high quality tungsten carbide plate which can enhance your productivity and save your cost.

Types of hard metal plate for making 24 and 39 holes tungsten carbide draw plate:

Grade:K10, K20,K30,K40,

New of Hot selling Size in 100x50.3x8.15mm,

Usage: widely used in machinery,

Advantage: with superior strength, toughness, and wear resistance

Blank of hard metal plate:

High polished hard metal plate in grinding surface:

Other types of hard metal plate may be offered according to customers' requirement.

Sizes of hard metal plate:

Unit:mm

Type(L×W)	Thickness(H)	Tol.
		Length(L)	Width(W)	Thickness(H)
50×50×H	1.5~10	L×±1.5%	W×±2.5%	H×±2.5%
100×100×H	2.5~60
120×120×H
150×150×H
200×200×H
300×200×H

Customized design is available.

Grades of hard metal plate used for molds of electric motor

Grade	ISO Grade	WC %	CO %	Grain Size	Density	Rockwell Hardness		Vickers hardness	Bending Strength	Application field
Grade	ISO Grade	WC %	CO %	Grain Size	g/cm3	HRA	HRC	HV	N/mm2	Application field
GB16	K20	92	8	1.6	14.7	90	76	1432	≥3500	silicon steel sheet,upper mould
GB22	K30	89	11	1.6	14.3	88.5	73	1250	≥3650	Silicon steel sheet of upper mould, The upper and lower mould of cold-rolled sheet materials
GB30	K40	85	15	1.6	14	87	70.4	1100	≥3800	The upper and lower mould of Silicon steel sheet and Cold-rolled sheet.
GB40	K40	80	20	1.2	13.7	84.5	66	900	≥4200	The upper and lower mould of silicon steel sheet(it is good choose for thick plate with high pressure resistance)

Grades of hard metal plate used for IC molds

Grade	ISO Grade	WC %	CO %	Grain Size	Density	Rockwell Hardness		Vickers hardness	Bending Strength	Application field
Grade	ISO Grade	WC %	CO %	Grain Size	g/cm3	HRA	HRC	HV	N/mm2	Application field
GB05	K10	94	0.8	1	14.9	91.55	78.4	1600	≥3200	For machining copper,aluminum and non-ferrors metal plate
GB06	K20	92	0.8	1	14.7	90.5	77	1500	≥3600	For machinings copper pieces,aluminum pieces etc.
GB07	K40	87	1	1	14.3	88.5	73	1250	≥3850	Has widely usage, like for copper pieces,aluminum sheet etc.
GB08	K40	85	1	2	14	88	72.2	1200	≥4000	Processing for EI pieces,SPCC/stainless steel sheet etc.