k30 tungsten carbide flat pieces
USD $10 - $30 /Piece
Min.Order:1 Piece
Zhuzhou Kerui Cemented Carbide Co., Ltd.
k30 tungsten carbide flat pieces
Product introduction:
Type: tungsten Carbide flat
Grade: K30,k40 etc.
Product picture:
Types of carbide wear part for vsi impact crusher:
Unit: mm
Type | Dimension(mm) | Type | Dimension(mm) | ||||
L | w | T | L | w | T | ||
45x12xT | 45 | 12 | 2~8 | 15.5x4xTxT | 15.5 | 4 | 1~3 |
45x14.3xT | 45 | 14.3 | 2~10 | 25.4x12.7xT | 25.4 | 12.7 | 1~3 |
50x10.5xT | 50 | 10.5 | 2~8 | 25.4x3.2xT | 25.4 | 3.2 | 1~3 |
50x13.5xT | 50 | 13.5 | 2~10 | 25.4x4.8xT | 25.4 | 4.8 | 1~3 |
50x14.3xT | 50 | 14.3 | 2~10 | 25.4x6.4xT | 25.4 | 6.4 | 1~3 |
60x12.5xT | 60 | 12.5 | 2~10 | 25.4x9.5xT | 25.4 | 9.5 | 1~3 |
65x17xT | 65 | 17 | 2~12 | 28.6x4.8xT | 28.6 | 4.8 | 1~3 |
65x18.3xT | 65 | 18.3 | 2~12 | 31.8x6.4xT | 31.8 | 6.4 | 1~3 |
65x20.3xT | 65 | 20.3 | 2~10 | 38.1x12.7xT | 38.1 | 12.7 | 1~3 |
70x12.5xT | 70 | 12.5 | 2~10 | 38.1x6.4xT | 38.1 | 6.4 | 1~3 |
70x13.5xT | 70 | 13.5 | 2~10 | 38.1x7.9xT | 38.1 | 7.9 | 1~3 |
70x15.5xT | 70 | 15.5 | 2~10 | 40x11xT | 40 | 11 | 2~10 |
76.2x12.7xT | 76.2 | 12.7 | 1~6 | 40x15xT | 40 | 15 | 10 |
76.2x15.8xT | 76.2 | 15.9 | 1~6 | 40x20xT | 40 | 20 | 0.4 |
76.2x16.9xT | 76.2 | 16.9 | 1~6 | 40x20xT | 40 | 20 | 0.25 |
76.2x19.1xT | 76.2 | 19.1 | 1~6 | 40x9.5xT | 40 | 9.5 | 3~9 |
76.2x7.9xT | 76.2 | 7.9 | 1~5 | 50.8x9.8xT | 50.8 | 9.8 | 1~3 |
76.2x9.5xT | 76.2 | 9.5 | 1~6 | 50x15xT | 50 | 15 | 10 |
82.5x10xT | 82.5 | 10 | 1~2 | 50x20xT | 50 | 20 | 10 |
82.5x7xT | 76.2 | 7 | 1~2 | 50x8.5xT | 50 | 8.5 | 3~9 |
83x10.5xT | 83 | 10.5 | 1~3 | 51x13.5xT | 51 | 13.5 | 4~10 |
83x11xT | 83 | 11 | 1~3 | 51X15.5xT | 51 | 15.5 | 4~10 |
83x19.6xT | 83 | 19.6 | 1~7 | 51x17xT | 51 | 17 | 4~12 |
83x6xT | 82.5 | 6 | 1~2 | 60.8x7.9xT | 60.8 | 7.9 | 1~3 |
83x7.5xT | 83 | 7.5 | 1~2 | 60x12.5xT | 60 | 12.5 | 3~10 |
Physical and mechanical properties of main grades:
Reference packaging:
Production process:
Quality inspection instruments:
Quality control:
1. All raw materials are tested in terms of density, hardness and T.R.S before use.
2. Every piece of product goes through in-process and final inspection.
3. Every batch of product can be traced.
Payment method:
Transportation mode:
By express, by air, by road, by railway, by sea etc.
Company profile:
Contact:
Tel: 0086-731-22278868
Fax: 0086-731-22609167