tungsten carbide inserts for mining
USD $50 - $60 /Piece
Min.Order:1 Piece
Zhuzhou Kerui Cemented Carbide Co., Ltd.
tungsten carbide inserts for mining
Our Tungsten Carbide inserts can used in minerals & metallurgy most hot selling item that we are currently producing.
Please allow me briefly introduce our factory of Tungsten carbide inserts as below:
1.Product description:
Type: Conical buttons
2.Application of our tungsten carbide inserts for mining drill bits:
Our carbide inserts can be use in the minerals & metallurgy,
for the drilling of mining drill bits,oil well, water well and so on.
3.Advantages of our mining carbide inserts:
1.stable and reliable quality;
2.made from 100% virgin material;
3.all products go through in-process and final inspection;
4.free online technical service available;
5.Sample available;
6.Material-tungsten carbide & Cobalt;
7.Optional grades: YK10/YK20/YK25/YK40/YG6C/YG8C/YG11C/YG13C/YG15C ;
8.Types: type Q(spherical),type Z(conical),type D(parabolic),type P(flat-top)etc;
9.Surface:polished;
10.high stability,long life circle;
11.good abrasive and corrosion resistance;
12.high quality and high hardness;
13.purity without recled materials;
14.with coating or uncoating;
fessional manufacture;
16.details pictures of our Conical type carbide inserts:
4.Followings are some of our distinguished customers:
Main Markets | Europe America Middle East South Asia |
Some of our customers |
|
Grade | ISO Grade | Density g/cm3 | Hardness HRA | T.R.S>N/mm2 | Performances or recommended applications |
YG6 | K20 | 14.85-15.05 | 90.5 | 1860 | Medium grain, for rough machining of non-ferrous metals |
YG6A | K10 | 14.85-15.05 | 92 | 1600 | Fine grain, for drawing dies and woodworking tools |
YG6X | K10 | 14.85-15.05 | 91.7 | 1800 | Fine grain, for cutting of non-ferrous metals |
YG7 | K20 | 14.65-14.85 | 90 | 1900 | Medium grain with good wear-resistance and good impact- resistance |
YG8 | K30 | 14.60-14.85 | 89.7 | 2060 | Medium grain, for drawing dies |
YG10 | K40 | 14.25-14.55 | 88 | 2160 | Medium grain, for machining gray cast iron with a low hardness |
YG11 | K40 | 14.30-14.50 | 87.5 | 2260 | Medium grain, for wear parts and mining tools |
YG11C | 14.20-14.40 | 87 | 2260 | Coarse grain, for mining inserts | |
YT14 | P20 | 11.20-11.80 | 91 | 1550 | Suitable for semi-finishing and finishing machining of steel and cast steel, using a medium feed-rate |
YT15 | P10 | 11.10-11.60 | 91.5 | 1500 | Suitable for semi-finishing and finishing machining of steel and cast steel and a medium feed-rate and a rather high cutting speed is to be recommended |
6.Quality control system:
Every batches of material will be tested in density, HRA, TRS and magnetic saturation, test report will be kept in our files.
Strict quality control system to make sure every single piece can match your requests and we guarantee full payment returned if any quality problems with our mining carbide inserts.
Note: Please kindly advise the grade or using purpose for quotation.
7.Related mining drilling bits tungsten carbide inserts for your reference:
8.Tungsten Carbide inserts for mining purpose:
It is applicable to the manufacturing of heavy rock drilling machine, slice or column bore bit used for digging hard rock, various gear wheel drilling bits; it is also applicable to the manufacturing of stone wall in building installation project, concrete drilling bit, it can also be used for crashing aluminum oxide and stone.
9.Packing pictures:
10. Belowing is our carbide inserts of mainly producing processes:
1)blending,wet milling:
2)pressing:
3)Sintering:
Main product of our factory mainly used for power tool parts as:
1.Cemented carbide buttons, carbide gauge protection;
2.Carbide stone cutting tips/inserts;
3.Cemented carbide indexable inserts & brazed tips, PCD/PCBN substrate;
4.Carbide bar for sand making tool machine;
5.Cemented carbide milling inserts.
If you have any question, we can talk as below my contact information:
Hope we can provide our best service for you!