oi2s optical interface board for huawei SDH metro 1000

Product Overview
       OptiX Metro 1000 product is a new generation of STM-1/STM-4 compatible multi-service transmission equipment , it provides the STM-1/STM-4 optical transmission synchronization function, its line rate can be upgraded online from STM-1 to STM-4. OptiX Metro 1000 product provides rich business interfaces and the powerful capability of cross-connection.

Product Features
Small size with low power consumption.
The machine box size is 436mm × 293mm × 86mm (W × D × H), the height is 2U, with a typical configuration, the power consumption is less than 50W, and it can directly access-48V, +24 V, 110V/220V power.

multiservice interfaces
SDH service interface
PDH service interfaces
Data service interface
Voice service interface
Private Line Service Interface
SHDSL interface

perfect optical interface series
A variety of specifications of the STM-1 optical interfaces
A variety of specifications of the STM-4 optical interfaces

various auxiliary interfaces
provides users with a number of data interfaces with its powerful overhead processing capabilities

 Two-wire analog telephone interface providing renewable segment / reuse segments official contact
Users can customize the transparent data interface
on-off input and output interface
10M Ethernet network management interface
RS-232 power supply monitoring interface

Flexible configuration
the configuration of OptiX Metro 1000 is quite flexible. Each NE can not only be configured as a single STM-1/4 TM or ADM system but also can be configured as the combination of STM-1 and STM-4 interfaces, which is a multi-ADM system, and it can realize cross-connection of multi-systems; when accessing the data traffic, it can configurate transmission bandwidth and Ethernet port effectively based on users’ need, and can meet user’s increased demand for bandwidth without increasing the port and veneer.

Flexible networking
OptiX Metro 1000 provides a variety of network formation ways, supports a variety of network topologies, including point-to-point, chain, ring, ring with chain, intersecting rings, tangent rings, mesh-shaped etc..

Well-protected
OptiX Metro 1000 supports a variety of network-level protection ways, including the MSP protection mode, SNCP protection mode, PP protection mode, as well as shared fiber virtual path protection mode, the clock protection, power supply unit 1 +1 protection and many other device level protection ways.

Flexible DCC transmission mode
Through the external clock port to transfer the DCC information on our equipment; to support DCC pass-through network management information transmission equipment of other companies; the network management interface can also be connected to the Ethernet interface board to transmit network management information.

Mature Function NMS
OptiX Metro 1000 and OptiX series products adopt a unified network management platform for centralized operation, maintenance and management (OAM), to make sure the circuit configuration and scheduling, and secure network operation.

Excellent SSM management functions
OptiX Metro 1000 NE clock has the perfect SSM management functions. Its external synchronization port can directly receive synchronization information from the external timing device, its output port also has the SSM, and can flexibly set the bit where the external 2048kbit / s SSM signal SSM exists. It can input the 2MHz signal to the outside and manually set the SSM messages, easy docking with other manufacturers’s equipment . Additionally, it can set the SSM threshold of each network element to facilitate the management of synchronization network.

A superior clock synchronization performance
it uses a high-precision crystal as an internal oscillating source , and uses a specialized  clock processing chip, to ensure that the technical indicators is in full compliance with the requirements of the ITU-T G.813 recommends. The timing system can work in tracking mode, hold mode and free oscillation mode. The timing system provides the SSM function. When being worked in tracking mode, it can be arbitrarily selected line, branch, one of the external clock synchronization source as a reference clock source; through various priority clock functions, to ensure reliable operation of the network timing system.

Physical characteristics:
  OptiX Metro 1000
Power access 220V AC/-48V DC/+24V DC
Support for battery management
Installation ways:Wall-mounted, and ETS 300mm deep cabinet, ETS 600mm deep cabinet, installed in a 19-inch cabinet.
Size: 436mm×293mm×86mm(W × D × H)
Weight <8.1kg
Power consumption <100W