Classic Temposonics Profile CANbus Magnetostrictive Transmitter
USD $300 - $1,000 /Piece
Min.Order:1 Piece
F model is design for very long stroke lengths and linear measurements on an arc. Standard stroke length begins from 2500mm up to 10 meters. And longer lengths are available for special applications. The F model is available with all 19 series outputs including analog, serial digital and fieldbus interfaces.
Order Code | 196 |
Output | DeviceNet |
Measurement Type | Linear displacement |
Data Protocol | DeviceNet 2.0 Version |
Output Signal | CAN FieldBus System ISO 11898 |
Baud Rate | Baud rate : 500 250 125 Kbit/s |
Cable length : <100 <250 <500 m | |
Resolution | 2μm or 5μm |
Resolution | Displacement : 1 / 2 / 5 / 10 / 20 / 50 / 100 μm |
Repeatability | < +/-0.001% of full scale (minimum +/-2.5μm) |
Non-Linearity | < +/-0.01% of full scale (minimum +/-40μm) |
Update Time | 0.5 ms up to 1200 mm / 1.0 ms up to 2400 mm |
2.0 ms up to 4800 mm / 5.0 ms up to 7600 mm | |
Input Voltage | +24Vdc (20.4 - 28.8Vdc) |
Input Protection | Polarity protection up to -30Vdc, Over voltage protection up to 36Vdc |
Power Consumption | 100mA (stroke range dependent) |
Dielectric Strength | 500Vdc (DC ground to machine ground) |
Connector Type | D60 Male |
Operation Temp. | -40 to 75 °C, Humility 90% non-condensing |
Sealing | IP67 (with connector) |
Shock Rating | 100g single hit per IEC standard 68-2-27 |
EMC | Emission EN 68000-6-3, Immunity EN 61000-6-2, EN 61000-4-2/3/4/6 |
The exact payment methods and currencies you can use depend on your location.