Promotional Flexible Long Wind Turbine P-interface Level Transmitter
USD $300 - $1,000 /Piece
Min.Order:1 Piece
D model is design for hydraulic cylinder with limited head space or clevis rod ends hydraulic cylinder. Sensing rod is made by stainless steel which installed inside the hydraulic cylinder. It is connected to the electronic module installed at the outside of the cylinder by a robust cable.
Order Code | 190 |
Output | Voltage |
Measurement Type | Linear displacement |
Measured Variables | For dual magnets, kept minimum distance of 76mm in between |
Resolution | 16 Bit D/A, 0.0015% (minimum 1um) |
Repeatability | < +/-0.001% of full scale (minimum +/-2.5μm) |
Non-Linearity | < +/-0.01% of full scale (minimum +/-40μm) |
Update Time | 0.5 ms up to 1200 mm / 1.0 ms up to 2400 mm |
2.0 ms up to 4800 mm / 5.0 ms up to 7600 mm | |
Input Voltage | +24Vdc (20.4 - 28.8Vdc) |
Input Protection | Polarity protection up to -30Vdc, Over voltage protection up to 36Vdc |
Power Consumption | 100mA (stroke range dependent) |
Dielectric Strength | 500Vdc (DC ground to machine ground) |
Connector Type | D60 Male |
Operation Temp. | -40 to 75 °C, Humility 90% non-condensing |
Sealing | IP67 (with connector) |
Shock Rating | 100g single hit per IEC standard 68-2-27 |
EMC | Emission EN 68000-6-3, Immunity EN 61000-6-2, EN 61000-4-2/3/4/6 |
The exact payment methods and currencies you can use depend on your location.