Model | S-35-5 | S-35-12 | S-35-15 | S-35-24 |
| DC voltage | 5V | 12V | 15V | 24V |
Voltage tolerance | ±2% | ±1% | ±1% | ±1% |
Rated current | 7A | 3A | 2.4A | 1.5A |
Current range | 0~7A | 0~3A | 0~2.4A | 0~1.5A |
Rated power | 35W | 36W | 36W | 36W |
Ripple&noise | 100mvp-p | 120mvp-p | 120mvp-p | 120mvp-p |
DCvoltage ADJ.range | -9%~+10% | ±10% | ±10% | ±10% |
| Voltage range | 90~132VAC/180~264VAC(selected by switch), 255~373VDC |
Frequency | 47~63Hz |
AC current | 0.8A/115VAC, 0.45A/230VAC |
Efficiency | 72% | 76% | 76% | 78% |
Inrush current | cold start current 18A/115VAC, 36A/230VAC |
Leakage current | < 3.5mA/240VAC |
| | above 115%~150% rated power |
protection type: part layer type current limit, auto-recovery after fault condition is removed |
| working temp,humidity | -10°C~+60°C, 20%~90%RH |
Storagetemp,humidity | -20°C~+85°C, 10%~95%RH non-condensing |
| Withstand voltage | I/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC |
Isolated resistance | I/P-O/P,I/P-FG,O/P-FG: 100M ohms/500VDC |
| Safety standard | Fit UL1012 |
EMC standard | meet EN55022, CLASS A |
| Dimension | 129*98*38mm (L*W*H) |
Weight/packing | 0.4kg/45pcs/19kg/0.034m³/1.2CUFT |
| 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.3. Tolerance : includes set up tolerance, line regulation and load regulation. |