Model | LPV-100-12 | LPV-100-24 | LPV-100-36 | LPV-100-48 |
| DC voltage | 12V | 24V | 36V | 48V |
Voltage tolerance | ±1% | ±1% | ±1% | ±1% |
Rated current | 8.5A | 4.2A | 2.8A | 2.1A |
Current range | 0~8.5A | 0~4.2A | 0~2.8A | 0~2.1A |
Rated power | 102W | 100.8W | 100.8W | 100.8W |
Ripple&noise | 100mvp-p | 150mvp-p | 150mvp-p | 180mvp-p |
| Voltage range | 90~264VAC,126~373VDC |
Frequency | 47~63HZ |
AC current | 2.4A/115VAC, 1.2A/230VAC |
Efficiency | 82% | 84% | 84% | 85% |
Inrush current | Cold start current 20A/115VAC, 40A/230VAC |
Leakage current | <2.5mA/240VAC |
| | Rated output power 105%~135%start over load protection |
Protection type: hiccup mode,auto-recovery after fault condition is removed |
| 15.6~17.8V | 30.6~33.2V | 42.6~44.2V | 54.8~56.6V |
Protection type: hiccup mode,auto-recovery after fault condition is removed |
| Shell temp≥85°C,start over temperature protection |
Protection mode: cutoff output,auto-recovery after temperature become normal |
| Working temp,humidity | -10°C~+60°C,20%~90%RH |
Storage temp.humidity | -20°C~+85°C,10%~95%RH non condensing |
Withstand vibration | 10~500HZ,2G 10min/1cycle,period for 60minutes,each axes |
| Withstand voltage | I/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC |
Isolated resistance | I/P-O/P,I/P-FG,O/P-FG: 100M ohms/500VDC |
| Safety standard | Fit UL1012,IP67 protect level |
EMC standard | Fit EN55022,CLASSA |
| Dimension | 185*69*43mm (L*W*H) |
Weight/packing | 0.9kg/20pcs/19kg/0.026 m³/0.91CUFT |
| 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation. |